Forster Products Bushing Full Length Sizer Die Features The Forster Bushing Full Length Sizer Die gives 6mm Creedmoor reloaders precise control over neck sizing tension while still sizing the case body and bumping the shoulder to chamber dimensions. By allowing the handloader to select a bushing matched to their brass the die avoids over-working the case neck a common cause of premature brass fatigue and split necks in full length sizing dies that lack this adjustability. The shoulder and body are sized down just enough to fit a minimum-sized SAAMI rifle chamber improving chambering consistency across a batch of brass. This combination of control and precision is what separates a bushing die from a standard full length die. Because the neck sizing is limited by the bushing rather than squeezed down to a single fixed dimension case life is extended significantly compared to standard full length dies letting reloaders get more firings out of the same batch of brass. Machined from steel for durability this die is built to handle the repeated pressure of the sizing process over thousands of cycles without losing precision. Reloaders chasing tighter accuracy and longer case life from their 6mm Creedmoor brass will find this bushing die a meaningful upgrade over a standard sizing die. Precision-focused handloaders looking to extend brass life while improving consistency should consider this Forster die for their reloading bench. Forster Products Bushing Full Length Sizer Die Specifications Manufacturer: Forster Products Model: Bushing Full Length Sizer Die Caliber: 6mm Creedmoor Die Type: Full Length Bushing Die Material: Steel Weight: 1.05 lbs Quantity: 1 Available At: GrabAGun