Forster Products Bushing Bump Neck Sizing Die Features The Forster Bushing Bump Neck Sizing Die takes a different approach than traditional neck style bushing dies or full-length style bushing dies sizing the case neck and adjusting headspace length without touching the body of the case. This targeted approach to sizing helps reloaders preserve more of the fire-formed case dimensions while still correcting the measurements that matter most for chambering and feeding. The included decapping assembly has no expander ball meaning the bushing itself determines the internal neck diameter giving reloaders precise control over neck tension by selecting the right bushing size. Forster recommends choosing a bushing approximately .002 inch smaller than a loaded round measures at the case neck with bushings available in .001 inch increments for fine adjustment. This die is compatible exclusively with Forster bushings and does not work with Redding or Wilson bushings so reloaders already invested in another brand s bushing system will need to acquire new bushings separately which are sold on their own. Like all Forster dies this bushing bump neck sizer is hand-polished to very tight tolerances to minimize friction and maximize concentricity during the sizing process. For 6.5 PRC reloaders chasing tighter neck tension control and more precise ammunition the Forster Bushing Bump Neck Sizing Die is available for sale at GrabAGun. Forster Products Bushing Bump Neck Sizing Die Specifications Manufacturer: Forster Products Reloading Caliber: 6.5 PRC Die Type: Neck Sizer Die Available At: GrabAGun