Forster Products Bushing Full Length Sizer Die Features The Forster Bushing Full Length Sizer Die is built to give 7mm PRC reloaders precise control over neck tension a factor that directly affects how consistently a bullet releases from the case during firing. Rather than working the entire neck down and back up with a fixed expander the bushing design sizes only as much of the neck diameter as the reloader selects reducing unnecessary brass working. At the same time the die sizes the case body and bumps the shoulder back just enough to chamber reliably in a minimum sized SAAMI spec rifle chamber. This combination of controlled neck sizing and body sizing in one die simplifies the reloading process while improving consistency. Limiting how much the neck is worked on each reloading cycle helps extend case life since brass that is repeatedly over sized and expanded work hardens and becomes prone to cracking sooner. The precise shoulder bump this die provides also improves chambering reliability and can contribute to more consistent accuracy from load to load. Machined from steel this die is built to the tight tolerances precision reloaders expect from Forster. The Forster Bushing Full Length Sizer Die gives 7mm PRC shooters a serious tool for extending brass life and improving round to round consistency at GrabAGun. Forster Products Bushing Full Length Sizer Die Specifications Manufacturer: Forster Products Model: Bushing Full Length Sizer Die Caliber: 7mm PRC Die Type: Full Length Bushing Die Material: Steel Weight: 1.05 lbs Available At: GrabAGun