Area 419 Zero S-Series Sizing Die Features The Area 419 Zero S-Series Sizing Die is reamer cut to exacting dimensions for a true size eliminating the sticky bolt feel on the second firing that plagues many standard dies. A precision ground expander mandrel ships with every die with the included mandrel providing .002 inch of neck tension while additional increments are available separately through Area 419 s mandrel kit for reloaders who want to fine-tune tension further. The die incorporates a full-length neck to extractor sizing spring ejection system for spent primers keeping the reloading process smooth and consistent from case to case. A hydraulic shoulder pressure relief feature further protects brass from being oversized during the sizing operation extending case life. Built to a standard 7/8 inch die body this Zero S-Series die is compatible with common shellholders from Redding Hornady RCBS and other major manufacturers as well as with Area 419 s own ZERO Modular Shellholder System for added versatility. Every die ships with an Area 419 ZERO Universal Die Ring a spare decapping pin and the tools necessary for installation and removal. Replaceable steel decap pins mean the die can be serviced rather than replaced if a pin is damaged extending its usable life. For precision reloaders loading 6.5 Creedmoor this die delivers the consistency and durability needed for repeatable accurate ammunition. Area 419 Zero S-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero S-Series Sizing Die Type: Sizing Die Caliber: 6.5 Creedmoor Die Type: Standard 7/8 Material: Stainless Steel Weight: 2 lbs Available At: GrabAGun