Area 419 Zero M-Series Sizing Die Features The Area 419 Zero M-Series Sizing Die for 6.5 PRC was engineered by the same team that built the ZERO Reloading Press combining years of reloading research into a single die designed to produce match grade ammunition. A micrometer adjustable headspace and shoulder bump mechanism lets the reloader precisely control how much the shoulder is set back which is critical for consistent chambering and extended brass life. The die ships with a precision ground expander mandrel for neck tension control with additional increments available through the Area 419 Mandrel Kit for reloaders who want to fine tune their setup further. Full length sizing from the neck down to the extractor groove ensures the case will chamber smoothly even after repeated firings. Replaceable steel decapping pins keep the die running reliably over the long term and spring ejection clears spent primers automatically during the sizing stroke. A hydraulic shoulder pressure relief system protects both the press and the brass from excess strain during sizing. Because this is a 1-1/4 inch die it requires a Hybrid or 1-1/4 inch turret and a larger diameter ZERO M-Series shellholder rather than a standard shellholder. Every die ships with an Area 419 ZERO die ring a spare decapping pin and the tools needed for installation and removal making it a complete ready to use precision sizing solution for 6.5 PRC reloaders. Area 419 Zero M-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero M-Series Sizing Die Caliber: 6.5 PRC Dimensions: 9 x 6 x 2 Weight: 3 lbs Available At: GrabAGun