Area 419 Zero S-Series Sizing Die Features The Area 419 Zero S-Series Sizing Die is reamer cut to exacting dimensions for a true size directly addressing the sticky bolt feel some reloaders experience after a case has been fired a second time. A full-length neck to extractor sizing spring ejects spent primers automatically during the sizing stroke keeping the reloading process moving without extra manual steps. Hydraulic shoulder pressure relief helps prevent the case shoulder from being pushed back too far protecting case life and headspace consistency. Replaceable steel decap pins mean that routine wear on this high-use part does not require replacing the entire die. Every Zero S-Series die ships with a precision ground expander mandrel including a .002 neck tension mandrel as the standard configuration with additional tension increments available separately through Area 419 s mandrel kit. The die is compatible with common shellholders from brands like Redding Hornady and RCBS as well as Area 419 s own Zero Modular Shellholder System giving reloaders flexibility in press setup. Each die includes an Area 419 Zero Universal Die Ring a spare decapping pin and the tools necessary for installation and removal. Made entirely in America this 6.5 PRC sizing die brings Area 419 s engineering focus to a traditional 7/8 inch die format for reloaders who demand precision. Area 419 Zero S-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero S-Series Sizing Die Caliber: 6.5 PRC Die Type: Standard 7/8 Material: Stainless Steel Weight: 2 lbs Available At: GrabAGun