Area 419 Zero S-Series Sizing Die Features The Area 419 Zero S-Series Sizing Die brings many of the industry-leading features from Area 419 s M-Series Sizing Die into a traditional 7/8 inch die format. A precision ground expander mandrel ships with every die with a .002 neck tension mandrel included standard and additional tension increments available through Area 419 s separate mandrel kit. Full-length neck to extractor sizing is paired with spring ejection for spent primers keeping the sizing process clean and consistent shot after shot. Replaceable steel decap pins mean the die can be serviced rather than replaced as pins wear over time extending its usable life at the bench. Each die is reamer cut to exacting dimensions for a true size addressing the sticky bolt feel some reloaders experience after a case s second firing in a standard die. A hydraulic shoulder pressure relief feature further protects brass during the sizing stroke helping extend case life for dedicated 6mm Creedmoor reloaders. This die is sold die-only and does not include a shellholder but it is compatible with common shellholders from Redding Hornady RCBS and others as well as Area 419 s own ZERO Modular Shellholder System. Made 100 percent in America the die ships with an Area 419 ZERO Universal Die Ring a spare decapping pin and the tools needed for installation and removal. Area 419 Zero S-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero S-Series Sizing Die Type: Sizing Die Standard 7/8 Caliber: 6mm Creedmoor Material: Stainless Steel Includes: Precision Ground Expander Mandrel Die Ring Spare Decap Pin Compatible Hosts: Redding Hornady RCBS Shellholders Area 419 ZERO Modular System Country of Origin: USA Available At: GrabAGun