Area 419 Zero S-Series Sizing Die Features The Area 419 Zero S-Series Sizing Die is reamer cut to exacting dimensions for a true size addressing the sticky bolt issue that can develop after a case has been fired and resized a second time. A precision ground expander mandrel ships standard with a .002 inch neck tension setting and additional mandrel increments are available separately for handloaders who want to fine-tune neck tension further. A hydraulic shoulder pressure relief feature protects brass from over-sizing while still achieving consistent shoulder bump a detail that matters for extending case life. The full length neck to extractor spring ejects spent primers cleanly with each cycle keeping the press running smoothly. Replaceable steel decap pins mean the die stays in service even after the original pin eventually wears out or bends saving the cost of replacing the entire die. The Zero S-Series fits a standard 7/8 inch press and is compatible with common shellholders from Redding Hornady RCBS and similar manufacturers as well as Area 419 s own Zero Modular Shellholder System. Every die ships with an Area 419 Zero Universal Die Ring a spare decapping pin and the tools needed for installation and removal. The Area 419 Zero S-Series Sizing Die for .308 Win is for sale at GrabAGun for reloaders who demand precision and consistency from their press. Area 419 Zero S-Series Sizing Die Specifications Manufacturer: Area 419 Model: Zero S-Series Sizing Die Caliber: .308 Win Die Type: Standard 7/8 Material: Stainless Steel Weight: 2 lbs Available At: GrabAGun