Product Description
LMT Defense 3-Prong Flash Hider, 5.56, 1/2x28, HUB/Xeno Mount Compatible
The LMT Defense 3-Prong Flash Hider is a 5.56 muzzle device for rifles with 1/2x28 barrel threads. Its open-prong geometry is designed to reduce visible muzzle flash, while individually detuned prongs help limit the metallic ringing associated with many traditional three-prong designs. This exact version is manufacturer SKU RFH1228556, item 430120010, and UPC 850076573195.
The flash hider is CNC-machined from 17-4 stainless steel with a 0.300-inch bore. It measures 2.16 inches overall, adds approximately 1.648 inches beyond the muzzle, and weighs 3.5 ounces. The device can function on its own or form part of a compatible suppressor-mount system.
Order the exact LMT Defense 1/2x28 3-Prong Flash Hider from BattleHawk Armory. Verify host threads, bore clearance, and every suppressor-mount component before installation.
Flash-First Three-Prong Geometry
This device prioritizes flash suppression rather than maximum recoil reduction. Its three open prongs interact with muzzle gas as it exits the barrel, helping reduce the bright signature that can interfere with vision in low-light conditions. The intended benefit is a cleaner flash signature for shooters who prefer an open-prong muzzle device.
Each prong is cut to a different natural frequency. That detuned geometry is intended to reduce the audible harmonic ringing that can occur when identical open prongs vibrate after a shot or light contact. The design preserves the flash-hider role without treating recoil control as its primary purpose.
HUB and Xeno Mount Support
The mount interface supports the LMT HUB Regulator Mount Adapter, Dead Air Xeno pattern mounts, and compatible third-party HUB or Xeno pattern systems. It can be used with LMT rifle suppressors such as the ION 30, ION LT, and ION K when the appropriate matching adapter is installed. A compatible barrel thread does not by itself confirm suppressor fit.
Before combining components, verify the flash hider variant, mount interface, suppressor bore, thread direction, barrel length restrictions, and ammunition rating. Alignment should be checked through the assembled system. Do not substitute an adapter or mount simply because it appears to thread into place.
Exact 5.56 Fitment
This variant uses 1/2x28 host threads and a 0.300-inch bore. Those dimensions distinguish it from the larger 5/8x24, 0.370-inch version. Match the barrel threads and projectile diameter to the exact device, and confirm that the barrel shoulder gives the muzzle device a correct seating surface.
A shim kit is included to support proper alignment during installation. Work only on a completely unloaded firearm. Follow the barrel and suppressor makers' instructions for timing and torque, then verify bore alignment before firing through an attached suppressor. Use a qualified gunsmith when the thread condition, shoulder, or alignment is uncertain.
Product Specifications
Manufacturer: LMT Defense
Product: 3-Prong Flash Hider
Manufacturer SKU: RFH1228556
Item: 430120010
UPC: 850076573195
Caliber Configuration: 5.56
Host Thread: 1/2x28
Bore Diameter: 0.300 inch
Material: 17-4 stainless steel
Overall Length: 2.16 inches
Add-On Length: 1.648 inches
Weight: 3.5 ounces
Included: Shim kit
Frequently Asked Questions
Is this flash hider primarily a recoil brake?
No. Its primary role is visible-flash reduction. Shooters prioritizing maximum recoil mitigation should select a purpose-built muzzle brake.
What do detuned prongs do?
The three prongs use different natural frequencies to help reduce the ringing common to many open-prong designs.
Can it support a suppressor?
Yes, when paired with a compatible LMT HUB Regulator, Dead Air Xeno, or matching third-party mounting system and a correctly rated suppressor.
Buy the LMT Defense 5.56 3-Prong Flash Hider at BattleHawk Armory. Select UPC 850076573195 for the exact 1/2x28 RFH1228556 version.