Area 419 Powder Funnel Head Features The Area 419 Powder Funnel Head solves problems that plague universal plastic funnels starting with static cling that causes powder kernels to stick to the funnel walls. Because this head is machined from aluminum rather than molded plastic it carries no static charge to hold kernels in place which keeps powder flowing cleanly into the case. The head is sized specifically to the .25 Cal neck diameter rather than relying on a generic opening so it seats solidly on the case without tipping or spilling powder during charging. Its bore is cut a few thousandths smaller than bullet diameter which maximizes flow rate so reloaders are not waiting on powder to trickle through an oversized opening. This caliber specific head threads directly onto the Area 419 funnel body and the interface between the two is designed so no powder kernels can become trapped when the head is fully tightened. Machined from a solid billet of 6061-T6 aluminum the head is built to resist the wear of repeated reloading sessions and is safer for use with black powder than static prone plastic alternatives. Internal flutes disturb powder kernels at the neck to prevent jamming while giving the kernels airspace so they do not pack tightly on the way through. For reloaders running .25 Cal cartridges who already use or are building out the Area 419 funnel system this head is available for sale at GrabAGun. Area 419 Powder Funnel Head Specifications Manufacturer: Area 419 Model: Powder Funnel Head Caliber: .25 Caliber Material: Aluminum Length: 0.80 Width: 0.80 Weight: 0.10 lbs Available At: GrabAGun