Product Description
Springfield Armory Kuna, .40 S&W, 6 Barrel, 30rd, Black, w/ Strike Industries FSA Brace, Pistol
The Springfield Armory Kuna is a compact, large-format pistol built around a roller-delayed operating system, and this KN90640B-FSA configuration chambers it in .40 S&W. It comes with a Strike Industries FSA folding brace installed on the Picatinny end plate and two 30-round magazines, so it is ready for the range, home defense or a vehicle bag straight out of the box. If you want PDW-style handling with a cartridge that hits harder than 9mm, this is the Kuna to look at.
Springfield designed the Kuna to deliver real shooting stability in a portable package. The roller-delayed action, the factory muzzle brake and the folding brace all work toward the same goal: keeping the gun flat and on target during fast strings, even with the extra energy of a .40 S&W load.
Roller-Delayed Operating System
Instead of relying on a heavy straight-blowback bolt, the Kuna uses a locking roller to delay the bolt. That lets Springfield use a lighter design that reduces felt recoil. Less reciprocating mass means less jolt at the end of each cycle, which you feel as quicker sight recovery and easier follow-up shots. With a 30-round magazine of .40 S&W on board, that control matters, because it lets you actually use the capacity you are carrying.
Strike Industries FSA Folding Brace
This model ships with the Strike Industries FSA brace attached to the integrated Picatinny rail end plate. The FSA is a single-side folder that offers quick deployment and compact storage. Folded, the Kuna stays short at 15.5 inches overall for storage and transport; deployed, overall length grows to 24.5 inches and gives you a more stable shooting position. Because the end plate is a standard Picatinny rail, it also stays compatible with other Picatinny-mounted accessories down the road. Always check your state and local laws before changing the configuration.
6 Threaded Barrel and Multi-Port Muzzle Brake
The 6 barrel is cold radial hammer forged and finished in Melonite for wear and corrosion resistance. The muzzle is threaded 9/16x24 and capped from the factory with a multi-port muzzle brake to help tame muzzle rise. Note that 9/16x24 is a common .40-caliber thread pitch, so if you plan to swap muzzle devices, make sure the new device matches that thread.
Monolithic Aluminum Upper, Polymer Lower
The upper receiver is a monolithic aluminum piece with a Type III hardcoat anodized finish. It carries an integral M-Lok handguard, so you can mount a light, hand stop or other accessories without adding a separate rail system. The lower receiver is injection-molded, glass-filled polymer, which keeps weight down while holding up to hard use. The trigger guard is integral to the receiver. As configured with the brace, the pistol weighs 5 lbs 5 oz.
Hybrid Flip-Up Sights
Springfield's hybrid flip-up sights let you swap between two sight configurations without tools. The metal sights are adjustable and ride on the top of the receiver, so you have usable irons from day one. The flat top Picatinny rail also leaves room for a red dot or other optic if you want to add one.
Ambidextrous Controls and Ergonomics
The Kuna is built with fully ambidextrous controls, including an ambidextrous safety switch. The non-reciprocating charging handle is reversible, so you can set it up for either side, and because it does not move while firing, your support hand stays clear of the action. The AR-pattern grip uses Springfield's Adaptive Grip Texture for a secure hold, and the flat aluminum trigger gives a consistent finger position shot after shot. The pistol feeds from translucent 30-round magazines with metal feed lips, so you can check your round count at a glance.
Specifications
Manufacturer: Springfield Armory
Model: Kuna Pistol, Strike Industries FSA
Part Number: KN90640B-FSA
UPC: 706397988975
Caliber: .40 S&W
Capacity: 30+1
Magazines: (2) 30-round
Barrel: 6, cold radial hammer forged, Melonite, threaded 9/16x24
Muzzle Device: Multi-port muzzle brake
Operating System: Roller-delayed
Upper Receiver: Monolithic aluminum, Type III hardcoat anodized
Lower Receiver: Injection-molded glass-filled polymer
Handguard: Integral, M-Lok
Pistol Brace: Strike Industries FSA (folding)
Receiver End Plate: Picatinny
Sights: Hybrid flip-up
Trigger: Flat aluminum
Charging Handle: Reversible, non-reciprocating
Safety: Ambidextrous
Grip: AR-pattern with Adaptive Grip Texture
Color: Black
Weight: 5 lbs 5 oz
Overall Length: 15.5 - 24.5
Kuna .40 S&W vs. Kuna 9mm
Springfield also builds the Kuna in 9mm, including a 9mm Kuna with the same Strike Industries FSA brace. The 9mm version is the pick if you want cheaper practice ammo and the lightest recoil. The .40 S&W version trades a little of that softness for a heavier bullet while keeping the same 30-round capacity, controls and brace. Magazines are caliber-specific, so use .40 S&W Kuna magazines with this pistol.
Frequently Asked Questions
What caliber is this Kuna?This is the .40 S&W model, part number KN90640B-FSA.
Does it come with the brace?Yes. The Strike Industries FSA folding brace comes attached to the Picatinny end plate.
How many magazines are included?Two 30-round translucent magazines with metal feed lips.
Is the barrel threaded?Yes. The 6 barrel is threaded 9/16x24 and ships with a multi-port muzzle brake installed.
Can I mount an optic?Yes. The top Picatinny rail accepts a red dot or other rail-mounted optic, and the hybrid flip-up sights give you irons as well.
Is it ambidextrous?Yes. The Kuna has fully ambidextrous controls, including the safety, and the non-reciprocating charging handle can be switched to either side.
How does it ship?This is a firearm and must ship to a licensed FFL dealer. The buyer is responsible for following all federal, state and local laws.
$1286.25
$1330.00
3% Discount
You save $43.75
In Stock
at BattleHawk Armory
Price verified 2d ago
Product Details
Brand
Springfield Armory
MPN
KN90640B-FSA