Redding Reloading Type S Match Bushing Full Length Die Set Features The Redding Type S Match Bushing Full Length Die Set resizes 6mm Dasher brass to full length dimensions while still allowing precise control over the case neck a combination that is often difficult to achieve in a single operation. Interchangeable bushings available in .001 inch increments let the reloader select exactly how much the neck is sized and how much neck tension the finished case will hold. An adjustable decapping rod lets the shooter position the bushing to size only part of the neck length when a lighter touch is desired. Concentricity is improved because the bushing is free to self center on the case neck rather than being rigidly fixed reducing the runout that can hurt accuracy. The included Competition Seating Die uses a micrometer calibrated in .001 inch increments giving extremely fine control over bullet seating depth for reloaders chasing the last bit of precision from a 6mm Dasher load. A floating seating stem system further helps eliminate concentricity problems during the seating step itself keeping bullets aligned straight with the case axis. By removing the bushing and internal parts the Type S full bushing die can also be used as a body die for additional versatility on the loading bench. For 6mm Dasher shooters competing in benchrest or precision rifle disciplines this die set delivers the exacting control that Redding is known for. Redding Reloading Type S Match Bushing Full Length Die Set Specifications Manufacturer: Redding Reloading Model: Type S Match Bushing Full Length Die Set Caliber: 6mm Dasher Type: Bushing Full Length Die Set Available At: GrabAGun