RCBS Flat Nose Pistol Bullet Mould Features The RCBS Flat Nose Pistol Bullet Mould is cast from solid steel block construction giving it the durability and heat tolerance needed for repeated casting sessions without warping. Precision machining and steel alignment pins keep the two cavities true to one another so each bullet dropped from the mould matches its twin in weight and dimension. The 3/16 inch solid steel sprue plate is secured with tempered steel spring washers and screws which hold the plate firmly in position through the casting and cutting cycle. This combination of solid construction and precise alignment is what lets a caster reproduce the same .401 inch 180 grain flat nose bullet consistently across a casting session. This double cavity mould is designed for casters loading .40 SW and 10mm ammunition producing a flat nose lead bullet suited to target and practice loads. Handles are sold separately so casters with an existing RCBS handle set can add this mould directly to their lineup without replacing their current equipment. The two-cavity design doubles output per pour compared to a single cavity mould which speeds up the casting process for high volume reloaders. RCBS has built a long reputation in the reloading and casting world and this mould reflects the same attention to tolerance and repeatability found throughout their die and mould lineup. RCBS Flat Nose Pistol Bullet Mould Specifications Manufacturer: RCBS Model: Flat Nose Pistol Bullet Mould Caliber: .40 SW / 10mm Bullet Diameter: .401 Bullet Weight: 180 Grain Bullet Type: LFN Number of Cavities: 2 Mould Material: Cast Iron Handle Included: No Available At: GrabAGun