Mr Heater Buddy Series Hose Assembly Features The Mr Heater Buddy Series Hose Assembly runs 10 feet in length letting a Buddy Series heater or compatible appliance sit well away from the tank it draws from. Each end uses a swivel fitting with a 1 inch dash 20 male throwaway cylinder thread paired with a soft nose excess flow POL connector and hand wheel so the hose can be hand tightened without additional tools in the field or at camp. This design connects appliances built for small 1 pound bottles to larger 5 through 20 pound tanks extending burn time well beyond what a disposable cylinder alone can offer. The excess flow valve built into the POL fitting adds a layer of safety by restricting flow if a sudden pressure drop is detected. Because the hose is rated for both low pressure and high pressure propane tanks it covers a wide range of setups without requiring a different hose for each tank type. The specially designed hose material eliminates the need for a separate inline fuel filter simplifying the overall setup and reducing maintenance. Swivel connections on both ends make assembly and disassembly straightforward even in cold weather or with gloves on. This hose assembly is a practical upgrade for anyone running Buddy Series heaters off larger propane tanks at a campsite cabin or worksite. Mr Heater Buddy Series Hose Assembly Specifications Manufacturer: Mr Heater Model: Buddy Series Hose Assembly Length: 10 ft Connection: 1-20 Male Throwaway Cylinder Thread x Soft Nose Excess Flow POL Compatibility: 1 lb Bottles to 5-20 lb Tanks Available At: GrabAGun