Lee Precision Collet Die Features The Lee Precision Collet Die uses a collet mechanism that squeezes the case neck evenly against a precision ground mandrel aligning the neck concentrically with the case body for minimum runout. Because the die sizes only the neck rather than the entire case it avoids the excessive working of the brass that shortens case life in traditional full length sizing dies. No case lubrication is required with this design which speeds up the reloading process and eliminates the cleanup and inconsistency that lubricant residue can introduce. Reloaders chambering 6.5 PRC benefit from the .264 inch sizing diameter dialed in specifically for this cartridge supporting the tight tolerances precision shooters demand. Extended case life is one of the most practical benefits of this collet die design with properly sized brass capable of lasting up to ten times longer than cases worked through conventional dies. That longevity means the cost savings on just a handful of reloaded cases can offset the price of the die itself making it a smart long term investment for active handloaders. The die is sold on its own letting reloaders add it to an existing 6.5 PRC die set or build a dedicated neck sizing setup. Precision machined and built for accuracy focused reloading this Lee Precision Collet Die is available for sale at GrabAGun for anyone serious about consistent 6.5 PRC ammunition. Lee Precision Collet Die Specifications Manufacturer: Lee Precision Model: Collet Die Caliber: 6.5 PRC Bullet Diameter: .264 Die Type: Collet Neck Sizing Weight: 0.45 lbs Quantity: 1 Available At: GrabAGun