JP Enterprises JP-5 Lock Piece - 60Adeg 60Adeg Roller Bearing Angle A High Pressure / Suppressed / Longer Barrel A Proprietary Steel A Nitride Finish A JP-5 / MP5 Pattern A SKU: JP5-LP60 The JP Enterprises JP-5 60Adeg Lock Piece is the lowest available angle-recommended when increasing system pressure through a longer barrel, adding a suppressor, or switching to higher-pressure ammunition. Proprietary steel with nitride coating for low wear and low friction. The 60Adeg angle requires the most force to open the action, slowing the cycle for high-pressure configurations where the bolt cycles violently or the SCS bottoms out noticeably in the buffer tube. Note: under-delaying the JP-5 combined with high-pressure ammo can damage the gun-do not go below the appropriate angle for your configuration. Compatible with H&K MP5 and MP5 clones that accept H&K lock pieces. Validate bolt gap after installation. 60Adeg - Lowest Angle for High-Pressure Configurations The 60Adeg lock piece requires the most force to open the action. Recommended when system pressure is increased-longer barrel, suppressor, or high-pressure ammunition. Addresses violent cycling where the SCS bottoms out noticeably in the buffer tube. Caution - Under-Delay Risk Under-delaying the JP-5 combined with high-pressure ammunition can damage the firearm. Use the lowest-angle lock piece appropriate for your specific configuration. Validate bolt gap after installation. Proprietary Steel with Nitride Finish Manufactured from proprietary steel with nitride coating for low wear and low friction throughout the service life of the component. MP5 Platform Compatibility Compatible with JP-5 and H&K MP5. Compatible with MP5 clones that accept H&K lock pieces-not all MP5 clones are compatible. Validate bolt gap after installation as lock piece geometry may alter bolt gap. Specifications: Manufacturer: JP Enterprises Model: JP-5 Lock Piece SKU: JP5-LP60 Angle: 60Adeg Material: Proprietary Steel Finish: Nitride Platform: JP-5, H&K MP5, Compatible MP5 Clones Application: Lowest angle - suppressed, longer barrel, high-pressure loads, violent cycling