JP Enterprises JP-5 9mm FDE Top-Charge PDW 9in Pistol The JP Enterprises JP-5 Top-Charge 9mm pistol is a roller-delayed PDW built on a billet receiver set, available now at Battlehawk Armory in a complete Flat Dark Earth Cerakote finish. This configuration uses a 9-inch JP-5 SuperMatch lightweight barrel with a 1:10" twist, black Teflon finish, and 1/2x28 threads under a black 3-port JP compensator. A top-charge billet upper with a Radian Raptor-LT charging handle and a 7.125-inch rock-blasted M-LOK handguard with Magpul handstop keep the package compact without giving up a full-length accessory rail. Roller-delay internals include a QPQ 416 stainless JP-5 carrier, an 80-degree locking piece, and a QPQ roller-delay bolt for a softer impulse than a straight blowback 9mm. The FDE-coated billet lower carries JP extended mag-catch and right-side bolt-catch paddles, an enhanced magazine-release button, a 3.0-3.5 lb interchangeable competition trigger with a black curved module, and a reversible full-throw safety with modular black levers. Furniture is a Maxim Defense PDW brace with the JPSCS-XS-JP5 captured spring and a Magpul MOE-K2 grip in Flat Dark Earth, so the controls and brace match the Cerakote work. One Glock-pattern 10-round G26 magazine and Microfit takedown pins complete the pistol as specified on the build sheet. The combination of a 9-inch SuperMatch barrel, top-charge handle, and PDW brace is aimed at range and competition use where a short roller-delayed 9mm needs to stay flat and easy to run. Add the JP Enterprises JP-5 FDE Top-Charge 9mm PDW pistol to your collection at Battlehawk Armory today. Specifications Manufacturer: JP Enterprises Model: JP-5 Top-Charge PDW Pistol Caliber: 9mm Finish: Flat Dark Earth Cerakote (complete pistol) Barrel Length: 9" SuperMatch Lightweight Contour Twist Rate: 1:10" Barrel Finish: Black Teflon Thread Pitch: 1/2x28 Muzzle Device: JP 3-Port 9mm Compensator, Black Operating System: Roller Delay Upper: JP-5 Top-Charge Billet, Custom Finish Charging Handle: Radian Raptor-LT (JP-5) Handguard: M-LOK Carbine, 7.125" OAL, Rock-Blasted Custom Finish Handstop: Magpul M-LOK Bolt Carrier: JP-5 9mm, 416 Stainless QPQ Locking Piece: 80-Degree Bolt: JP-5 9mm Roller Delay, QPQ Brace: Maxim Defense PDW with JPSCS-XS-JP5 Grip: Magpul MOE-K2, Flat Dark Earth Trigger: Interchangeable 3.0-3.5 lb, Curved Black Safety: Reversible Full Throw Magazine: 1x Glock 9mm 10-Round G26 Additional: Microfit Takedown Pins, Extended Mag Catch, Right-Side Bolt-Catch Paddle This Pistol's Build Sheet: JP5G940/TC Pistol: JP-5 Pistol, 9mm, Top-Charge Billet Receiver Set OPToCK-DE-Rifle: Custom Finish (Complete Rifle): Flat Dark Earth Cerakote OPToJP5UA-TCH-CF: JP-5 9mm Top Charge Billet Upper Assembly, Custom Finish oRAD-RAPTOR-JP5: Radian Raptor-LT Over-Molded Ambidextrous Charging Handle for Use with the JP-5 oJPSM928JP5-9L10W-BT: Supermatch Barrel, JP-5 9mm Chamber, 9" Light Weight Contour, 1:10" Twist, Black Teflon, 1/2"x28 TPI oJPTRE3-928B: 3-Port 9mm Compensator, 1/2"x28 TPI, .750 OD, .406 Exit, Black oJPHGM-4M-CF: M-Lok Series Hand Guard, Carbine Length (7.125" OAL), Rock Blasted Custom Finish MAG608: Magpul M-Lok Hand Guard Handstop Kit oJPBC-2-JP5: JP-5 9mm Bolt Carrier, 416 STainless with QPQ oJPBCJP5-LOCKPC-80: JP-5 Locking Piece, 80 Degree oJPEB-JP5-9: JP-5 9mm Roller Delay Bolt Assembly, QPQ Finish oJP5-BCRSR-PADDLE-BLK: JP-5 Right Side Bolt Catch Release Paddle, Black oMC-JP5-BLK: JP-5 Extended Magazine Catch and Release Paddle, Black oEMC-BLK: Enhanced Magazine Release Button, Black oMD-PDW-XS-JP5: Maxim Defense PDW Pitol Brace and JPSCS-XS-JP5 oMAG522-DE: Magpul MOE-K2 Pistol Grio, Flat Dark Earth oFC-IC3.0 LBS: Interchangeble Trigger Competition/Recreational 3.0 - 3.5 lbs; Trigger Spring: Yellow; Hammer Spring: Yellow oFC-M-CURVED-BLK: Modular Trigger; Style/Color: Curved/Black oJPFC-S-FT: Reversible Safety, Full Throw Install oJPSL1-BLK: Modular Lever, Black oJPSL2-BLK: Modular Low Profile Lever, Black GL-9MM-10R: Glock 9mm 10-round G26 Magazine oJPTDP-223F-UU: Micorfit Take Down Pin, .223 Front oJPTDP-223R-UU: Microfit Take Down Pin, .223 Rear