CTRL Performance Trail Clipless PedalsDesigned for unparalleled control and power transfer on dirt trails. No other SPD-compatible trail pedal has a platform that contacts your shoe and locks in your feet like these. They are simultaneously lighter and thinner than other trail pedals with a low stack height. The open center between the cages means increased mud shedding compared to other SPD-compatible pedals.MAXIMUM SHOE CONTACTThe large platform area maximizes pedal and shoe contact. With many trail pedals, the only point of contact between the shoe and pedal is the cleat and cage, where it can feel like pedaling on a golf ball. With CTRL Performance Trail Clipless Pedals, the shoe contacts the pedal body to lock in your foot for enhanced performance.Wolf Tooth CTRL Performance Trail Clipless Pedals are designed for unparalleled control and support for all-mountain riding with flawless clip-in/out performance. No other SPD-compatible trail pedal has a large platform (965 mm2) that contacts and locks in your shoe like this. CTRL Performance Trail Clipless Pedals are light (341 g) and thin (16 mm) compared to other trail mountain bike pedals with an exceptionally low stack height. The thin profile means better cornering clearance, while the open center between the binding cages increases mud shedding ability.Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.Thinner than the competition at 16 mm (compared to the Shimano XTR 9220 at 18.2 mm and the Hope TC at 18.2 mm)Lighter than the competition at 341 g (compared to Shimano XTR 9220 at 439 g and Hope Trail at 438 g)Bigger platform area than the competition at 965 mm2 (compared to Shimano XTR 9220 at 883 mm2 and Hope Trail at 645 mm2)Fixed Q factor of 55 mm5 degrees float | 12 degrees releaseSPD compatibleProven axle and bearing design from Waveform Aluminum PedalsDesigned and tested at Wolf Tooth in Minnesota, USAAll SPD pedals benefit from simple regular maintenance. For best performance apply a drop of oil to the rear binding every 50 hours of riding or if you notice higher than normal clip in/out force. See the service guide for more informationApply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarmsCompatible with SPD cleats; Wolf Tooth cleats includedFits all standard cranks with 9/16-20 tpi right- and left-hand threads - some kid's bikes and vintage bikes may have smaller incompatible threads