Syncros i C-M100-CF2 Integrated Cockpit Carbon Integration, XC-Ready Geometry One piece of carbon does the work of two separate components. The i C-M100-CF2 fuses the stem and handlebar into a single carbon unit, eliminating the clamp interface between them entirely. That means no stem-to-bar bolts, no mismatched stiffness at the joint, and a front end that behaves as one coherent structure. The unidirectional carbon layup lets the engineers run continuous fiber through the junction point - exactly the kind of geometry that carbon handles best and alloy clamp connections cannot replicate. The result is a cockpit that is lighter than a comparable two-piece setup, stiffer where stiffness counts, and clean enough to pair with any modern XC or enduro MTB frame. Four stem-length options keep fit dialed without compromise. i C One-Piece Construction: integrates stem and bar into a single carbon unit, removing the hardware and weight penalty of a traditional clamp interface Unidirectional Carbon Fiber: UD fiber orientation maximizes tensile strength and stiffness-to-weight ratio compared to woven carbon layups740mm Bar Width: XC-optimized width fits the tighter trail geometry and shoulder-width ergonomics that cross-country and enduro racing demand Multiple Stem Length Options (50/60/70/80mm): four virtual extension lengths let you match the cockpit to your frame reach without swapping bars or stems separately | Syncros | Ic-M100-Cf2 Integrated Cockpit 740Mm X 50Mm