This 2" EMT conduit gong stand kit gives you everything you need but the 2" conduit for the cross-member and 1.25" EMT for the legs. This saves you a ton of money on shipping and manufacturing costs. All you need is one length of 2" EMT conduit for the cross-member and 1.25" EMT cut to whatever length you desire for legs and you have a stand! This also allows you to adjust the height and width of the stand to your specific needs. This may come in handy if you shoot in hilly terrain. For mounting hardware take a look out our compatible products below! Steel Chain Mounting Kit: CLICK HERE! Rubber Chain Mounting Kit: CLICK HERE! NOTE: The kit DOES NOT include the 2" conduit. It is shown in the pictures for demonstration only. You will need to buy the conduit at your local hardware store. The stand was only designed to work with 2" EMT conduit as a cross-member and 1.25" EMT for the legs. It WILL NOT work with other conduit or plumbing pipe. NOTE: This kit requires the following operations to be performed: cut tube to length, measure 1.5" from end, drill a 5/16" hole, and deburr ends. If you are unsure of how to perform any of these operations, you may want to consider one of our standard pre-cut gong stands. When completed, this stand can support even our heaviest targets with ease.