[embed]https://youtu.be/8IHtzVkaTa0[/embed] Have a gash or sidewall blowout on your 4x4 side by side, Jeep, Toyota, rock crawler, or trophy truck while out on the trails?? Definitely check out this awesome sidewall repair kit from Glue Tread! The new GlueTread Full-Size Kit includes our improved rubber formula and doesn&';t include the accelerator. Here&';s why: We&';ve improved our rubber formula, which allows the adhesive to cure more quickly without the accelerator. Additionally, keeping the accelerator out of the kit allows the adhesive to last longer. When the accelerator and adhesive are stored side by side, it actually causes the adhesive to slowly cure within the tube. We received a lot of feedback that patches applied without the accelerator adhere better and last longer on a compromised sidewall. The cure time without the accelerator and the improved rubber formula is about ten minutes. For off-road use only. If you are also looking for the Ultimate Off Road Tire Repair Kit then make sure you go check out our Xtreme 4x4 Tire Repair Bundle! VEHICLE TYPE: APPLICATIONS: repairing sidewall damage repairing a sliced tire repairing a punctured tire adding extra protection to areas of a tire that are worn covering cord covering a bulging tube covering an internal patch covering and repairing a cracked tire to keep out debris preventing a higher risk area from leaking in the future CONTENTS: [2] 4" x 4.5" Patch [2] 3" x 1.5" Patch [4] Bottles GlueTread Adhesive [8] Applicator tips [10] Pieces of sand paper TECHNICAL SPECS: Pressure Strength: 40 PSI Bond Strength: 5,000 PSI Patch Durometer: 75 Initial Cure Time: 30 Seconds Full Cure Time: 10 Minutes