Area 419 Funnel Head Features The Area 419 Funnel Head threads onto the Area 419 powder funnel and is sized specifically to the 6.5mm / .264 caliber case neck holding solid on the case rather than depending on a loose universal fit. Each head is bored a few thousandths smaller than the bullet diameter which maximizes powder flow for this caliber while still seating securely during charging. The color coded design helps reloaders quickly identify the correct head among a set cutting down on mix ups at the bench. Because the head and funnel interface is machined to close tolerance no powder kernels can become trapped between the two pieces when the head is fully tightened. Machined from a solid billet of 6061-T6 aluminum the funnel head resists the static charge that causes powder kernels to cling to plastic funnels which keeps charges accurate and consistent. That same aluminum construction makes the head notably safer for use around black powder compared to static prone plastic alternatives. A 3/8 inch straight section at the top of the funnel system helps prevent kernels from bouncing out during pouring improving overall charge retention. This caliber specific head is a practical upgrade for any reloader using the Area 419 funnel system for 6.5mm cartridges. Area 419 Funnel Head Specifications Manufacturer: Area 419 Model: Funnel Head Caliber: 6.5mm / .264 Cal Material: Aluminum Length: 0.80 Width: 0.80 Weight: 0.10 lbs Available At: GrabAGun