Replacement sealed cartridge bearings for hubs, suspension pivots, bottom brackets and headsets, stocked at our Midway shop. Pick your bearing by number from the menu above. If you&';re not sure which one your bike takes, bring the old bearing in or give us a call and we&';ll match it. Enduro MAX bearings MAX-type bearings are built for suspension pivots. They pack in the maximum number of balls for more load capacity than a standard radial bearing, with deeper race grooves for better lateral support under twisting loads. LLU dual-lip seals keep out water and grit, and each bearing is about 90% filled with grease. Sizes on this page (ID x OD x width) Enduro Max 608 - 8 x 22 x 7 mm Enduro Max 6001 - 12 x 28 x 8 mm Enduro 6802, Stainless Races - 15 x 24 x 5 mm Enduro Max 3802 Double Row Angular Contact - 15 x 24 x 7 mm Enduro Max 6902 - 15 x 28 x 7 mm DT Swiss 6803 - 17 x 26 x 5 mm Enduro Max MR 17287 / MR 17287 LLU BO - 17 x 28 x 7 mm Enduro Max 6903 - 17 x 30 x 7 mm Enduro 6804 - 20 x 32 x 7 mm DT Swiss 6805 - 25 x 37 x 7 mm Enduro Stainless Angular Contact 6806 - 30 x 42 x 7 mm Enduro 1.5" 45 x 45 ACB Stainless - 1.5" headset bearing, 45Adeg/45Adeg contact Need them pressed in? Our service department in Midway and Heber City does pivot and hub bearing replacements.