ROCKSOLAR 1.07 HP 65-110 V Solar DC Brushless Water Transfer Pump Kit What&';s included: 1 x 1.07 HP 65-110 V DC brushless water transfer pump + external MPPT controller 3 x Hanersun 445 W full-black bifacial solar panels (1,335 W array) 10 ft 10 AWG PV cable 1 x 2 String Waterproof PV Combiner Box with 32 A 500 V Circuit Breaker and surge protector Mounting brackets for solar panels (optional) Ground or roof mount rack (optional) User manuals + warranty card Included solar panel: Hanersun 445 W full-black bifacial panel. Each panel measures 67.80 x 44.65 x 1.18 in (1,722 x 1,134 x 30 mm) and weighs 51.4 lb (23.3 kg). Key specs: Motor: 1.07 HP DC brushless | Input: 65-110 V DC Max flow rate: 24.2 US GPM | Max head: 98 ft Protection rating: IP54 (pump) / IP65 (controller) Controller-to-motor cable distance: up to 262 ft (80 m) Solar array: 3 x 445 W bifacial panels (1,335 W) Built for: Livestock watering, agricultural irrigation, pool fountains, ponds, greenhouses, orchards, remote off-grid water supply Key features: Higher voltage range (65-110 V) = supports 3-panel string for larger solar array and higher flow output vs. the 40-90 V model 24.2 US GPM max flow = significantly higher volume than the 40-90 V kit&';s 9.6 US GPM - suited for larger irrigation or livestock operations Up to 262 ft (80 m) controller-to-motor cable distance = flexible installation, pump and controller can be far apart External MPPT controller - auto-adjusts to available sunlight, stops and restarts without manual intervention Float switch / pressure switch compatible - automates tank fill and shutoff IP54 pump + IP65 controller - permanent outdoor installation ready Advanced protections: dry-run, overload, overvoltage, low-voltage How the System Works The ROCKSOLAR Solar-Powered Water Pump System converts solar energy into a reliable water supply for livestock watering, irrigation, and remote agricultural applications. The operating sequence is as follows: Solar panels convert sunlight into direct current (DC) electricity. The solar pump controller continuously monitors the available solar power and adjusts the voltage and current to maximize energy harvest from the solar array. The controller supplies optimized DC power to the brushless surface transfer pump, ensuring efficient operation under varying sunlight conditions. The pump draws water with its intake pipeline from the well, pond, cistern, stream, river or other approved water source and delivers it through the discharge pipeline. Depending on the application: Livestock Watering: Water is pumped into a storage tank or watering trough. When an optional float switch is installed, the controller automatically stops the pump once the tank reaches the preset water level and restarts pumping when the water level drops. Agricultural Irrigation: Water is supplied to irrigation systems such as drip irrigation, sprinkler systems, soaker hoses, or storage reservoirs for crop, orchard, greenhouse, vineyard, pasture, and garden irrigation. Flow can be controlled using irrigation valves, timers, or storage tanks based on the specific irrigation design. During periods of insufficient sunlight, such as early morning, late evening, or heavy cloud cover, the controller automatically reduces pump speed or stops the pump to protect the system and optimize energy use. When adequate sunlight returns, the controller automatically restarts the pump without requiring manual intervention. This intelligent, fully automatic operation minimizes maintenance while providing a dependable and sustainable water supply for livestock, irrigation, and other off-grid agricultural applications. Flow rates are listed in U.S. gallons per minute (US GPM). Head and distance are in feet (ft); connection sizes are in inches (in). Maximum flow and maximum head are separate ratings and do not occur at the same operating point.