SF200WW Underwater FishLight Fire up a fish-feeding frenzy with the original SF200WW Underwater FishLight. This powerful light features our IntesiTech Right Bright LEDs that deliver unmatched intensity-the exact light frequency fish recognize and respond to. The IntensiTech LEDs used in a HydroGlow Underwater Light are unmatched for brightness. Just one of our LEDs could be used to power a flashlight. We use 200! And, we&';ve increased the brightness by 90% over the last three years. The SF200WW is designed to anchor to the bottom, projecting upward. Protected by our shatter-resistant HydroDome and Elude eco-friendly barnacle-resistant coating. We coat all SF model HydroGlow Underwater Lights with Elude, a revolutionary eco-friendly (biocide-free) marine coating that has effectively tripled the barnacle-free operational time of our lights. The critical components and LEDs are flooded with Impervia, a state-of-the-artmarine epoxy resin, to construct our lights. Other resins retain some level of porositywhich can allow micro-droplets of brine to penetrate, potentially resulting in corrosionor light failure. It also has a higher flexural strength rating. And, unlike polyester,Impervia is very resilient and less prone to shrinkage or warping, meaning it canwithstand an extreme range of water temps from a summer ocean to under the ice inthe winter. Each light includes a 50&'; cord (extra lengths available) and is perfect for creating a "See The Light" Safe Zone that attracts fish to your dock, waterfront dining area, or favorite fishing spot. The SF100WW also helps "Bring &';Em Up" from deeper waters during warm summer months when fishing is typically more challenging. Made in America. Built right. Backed by our "Proven Attraction" Performance Guarantee. Technical Specs: SF model lights should not be turned on in the air for longer than 2 minutes. 200 high-power LEDs are used to better illuminate an area from underwater in a 120deg field. For a wider spread of light place the light deeper in the water. The SF series uses a 48V driver which is IP67 rated with a 6&'; cord on the input side and needs to be plugged into 120VAC. This driver can be left outside in the rain without worry. Voltage: 48VDC (With 150W 120VAC driver) Current Draw: 3A Power Draw: 150W Lumen Output 57 lumen/LED with 192LEDs = 10,944 total lumen output in one direction Length 9" total length including 4" cord grip Diameter 4" Wavelength 3000K 90CRI White Light Weight: 4.2 lbs 50 foot cord included with an IP68 waterproof locking connector to the driver. Driver has 1&'; of length on output side and 6&'; length on input side Q: "Which color should I use?" A: For catching fish, Green is your best for fresh water, but Warm White and Daylight White also have benefits. Warm White (3000K) light provides a balanced, natural illumination ideal for near-surface environments and dock areas. This spectrum enhances underwater visibility by rendering colors more accurately, allowing you to see the natural tones of fish, plants, and submerged structures. The light&';s natural tone mimics evening sunlight, revealing the gentle shimmer of fish as they glide past and casting a warm reflection across the surface. This soothing glow highlights the water&';s natural beauty up close-perfect for quiet evenings, family gatherings, and dockside relaxation.