Price history at Lotz Outdoors
Price at Lotz Outdoors unchanged at $119.99 since Oct 9, 2026. Last checked Nov 15, 2026.
Product Description
100% USA Made Odin Works Southern Idaho 5.4-7.4 oz Range AR-9 A 9MM Blowback PCC Compatible In Stock ODIN Works A Southern Idaho - 100% USA Made Stainless steel body A 3x; tungsten weights A AR-9 and 9mm PCC blowback compatible The AR-9 blowback platform is notorious for one problem: buffer weight. Unlike direct-impingement AR-15s, the 9mm blowback AR-9 has no gas system to regulate cycling - it runs entirely on bolt mass and spring tension. Get the buffer weight wrong and you get short-strokes, failures to feed, excessive recoil, or a rifle that beats itself to pieces. The Odin Works Adjustable 9mm Buffer solves this with 5 weights - 1 aluminum, 1 stainless steel, and 3 tungsten - covering a 5.4 to 7.4 oz range that handles everything from standard 115gr loads to +P ammunition and everything in between. 100% USA made in Southern Idaho. 5-Weight System - Tungsten Heavy Built Heavy for 9mm Blowback Unlike the AR-15 system, the 9mm buffer includes three tungsten weights - because the AR-9 blowback platform needs mass, not just versatility. Heavier is almost always better in a blowback AR-9. The three tungsten weights let you dial in the precise heaviness your specific 9mm build and ammunition require. AL Aluminum x; 1 Light end - minimum config at 5.4 oz SS Stainless x; 1 Mid - intermediate blowback tuning W Tungsten x; 3 Heavy - 3 tungsten for maximum 7.4 oz config 5.4 Min oz Lightest 9mm blowback config 7.4 Max oz Max weight - +P, heavy loads, suppressed Why 9mm Blowback Needs a Heavy Buffer In a direct-impingement AR-15, the gas system bleeds off energy before it reaches the BCG. In a 9mm blowback AR-9, there is no gas system - the bolt moves directly from cartridge pressure with nothing to slow it down except buffer weight and spring tension. This is why an AR-9 needs a much heavier buffer than an AR-15 running the same barrel length. Under-buffered 9mm blowback builds short-stroke, fail to eject, or run so harshly they damage components. The Odin Works 9mm adjustable system - with its three tungsten weights - gives you the mass range to dial in any 9mm blowback build running any ammunition. Key Features The 9mm Buffer Your AR-9 Deserves Three tungsten weights included - the heaviest weight option available. Three tungsten weights give you fine-grained control over the heavy end of the 9mm blowback weight range where most AR-9s need to operate. 5.4 to 7.4 oz range - the widest weight range available for 9mm blowback AR platforms. Covers light 115gr target loads through heavy 147gr subsonic and +P defensive ammunition. Stainless steel body - heavy-duty construction matching the demands of the high-cycle-rate 9mm blowback operating environment. Built to outlast aluminum alternatives. AR-9 and 9mm PCC compatible - fits standard AR-9 mil-spec buffer tube configurations used by Glock-pattern, Colt-pattern, and other common AR-9 lower platforms. Suppressed 9mm optimization - running a suppressor on your AR-9? Start with maximum weight. The additional backpressure from a suppressor dramatically changes cycling behavior in blowback systems - the adjustable range gives you room to tune. Competition 3-Gun PCC tuning - 9mm PCC is one of the fastest-growing competition divisions. Fine-tune your AR-9 for the specific ammunition and stage requirements you&';re running. Change configs between matches without buying new buffers. Face-mounted set screw - swap weights from the front without disassembly. Field-adjustable in seconds. 100% USA made - Odin Works, Southern Idaho. Lifetime warranty. Technical Specs Full Breakdown Specification Odin Works 9mm Buffer Body Material Stainless Steel Weight Range 5.4 oz - 7.4 oz Weights Included 1 Aluminum + 1 Stainless Steel + 3 Tungsten (5 Total) Minimum Weight Config 5.4 oz Maximum Weight Config 7.4 oz Adjustment Method Face-mounted set screw - no tools required Platform AR-9 A 9mm Blowback A PCC A Mil-Spec Buffer Tube Glock Pattern Compatible Yes - standard mil-spec AR-9 tube Colt Pattern Compatible Yes - standard mil-spec AR-9 tube Suppressed Compatible Yes - run maximum weight config Installation Drop-In A No Modification Required Manufacturing 100% USA Made A Southern Idaho Warranty Odin Works Lifetime Warranty Compatible Platforms AR-9 9mm Blowback PCC Glock-Pattern AR-9 Colt-Pattern AR-9 3-Gun PCC Division Suppressed 9mm Builds 115gr A 124gr A 147gr Loads Odin Works 9mm Buffer - In Stock 100% USA Made A 5.4-7.4 oz A 3 Tungsten Weights A Ships Fast Add to Cart Related Products Odin Works HFRT9 - AR-9 FRT Specific Odin Works AR-15 Heavy Buffer Odin Works AR-10 Buffer Odin Works Ambi Safety - 8 Colors Best FRT Triggers 2026 Guide FRT Legal by State Guide ODIN WorksA(R) is a registered trademark of Odin Works, manufactured in Southern Idaho, USA. Compatible with mil-spec AR-9 buffer tube configurations. Glock-pattern and Colt-pattern AR-9 lowers may require a dedicated 9mm buffer tube - verify your lower&';s buffer tube compatibility before ordering.
$119.99
$139.99
14% Discount
You save $20.00
In Stock
at Lotz Outdoors
Price checked 6 days ago
Product Details
Brand
The Takedown Tools
Price history at Lotz Outdoors
Price at Lotz Outdoors unchanged at $119.99 since Oct 9, 2026. Last checked Nov 15, 2026.