48V Booster for Zero Breeze Mark 3 Power your Mark 3 from a 12V–36V DC power source using this compact, high-efficiency booster module. ?? This product is intended for experienced users familiar with DC electrical systems. Please read all warnings below before use. Specifications: Output Voltage : 48V Rated Output Power : 600W Cable Length : 1.2 meters (converter to D20 connector) Input Voltage Range : 12V–36V DC Input Current at 12V : Up to 55A (user-provided power source must support >600W) What's in the Box: You can choose your preferred cable type: Anderson Terminals Cable – Recommended for 24V–36V users Eye Terminals Cable – Recommended for 12V battery users 1 × 48V Converter Block 1 × XT90 Input Cable (based on your selection) ?? Important Notes & Disclaimers: 1. High Current Operation at 12V At 12V input, the booster can draw over 50A. This is not suitable for small power supplies or cigarette lighter ports . Use only with batteries or regulated DC sources capable of continuous 600W+ output. We strongly recommend using the Eye Terminals cable for 12V applications. 2. DIY Electrical Knowledge Required This is a high-current DC-to-DC converter intended for advanced users , including RV owners, off-grid system builders, and field technicians. It requires: Proper cable sizing and secure connections Adequate heat management Understanding of DC polarity and grounding Use with fuses or circuit breakers if integrated into a custom system Incorrect use may result in overheating, damage, or fire hazard. 3. Safety & Legal Disclaimer This accessory is not UL/CE certified for standalone use . It is part of an integrated system for powering Mark 3 and should be used accordingly. Zero Breeze is not liable for damages, injury, or loss resulting from incorrect installation or third-party modifications. If you are unsure how to use this safely, please contact us before purchase. Recommendations: Use a fuse (60A+) on the positive line when operating at 12V Avoid operating in enclosed spaces without ventilation Always double-check polarity before connecting Do not use damaged cables or terminals Need Help? If you have already purchased the booster with the Anderson cable but are using a 12V system, we can provide an Eye Terminals cable free of charge . Just contact our support team.