Labconco Capture Fuming Sys 230v Uk Unit EA. The unique optical window provides unobstructed vision in crowded environments and reduces the chance of aerosol reagent contamination. Each unit is supplied with a capture vessel gas manifold and a gas line. The modular system is designed to be used with any incubator offering a fuming vessel. To use the system simply place the incubation vessel into the fuming vessel and place the generator into a back of the incubator. After fuming the generator stores the recovered heat in a buffer until use. The buffer stores in a rear of the incubator. To light the heat producing reaction place the generator head into the fuel cell with the standard safety light. The light source and the exhaust pipe are pre-installed in the inlet of the inlet manifold. Simply place the inlet into the manifold and light the mating glow-on-a-wire lamp. The lamp glows on after one minute of operation so there is no concern of igniting the system. A capture vessel is required for operation. Specifications for Labconco Capture Fuming Sys 230v Uk 3420020: Manufacturer: Labconco Voltage: 230 volts Available quantity options: Each Package Contents: Labconco Capture Fuming Sys 230v Uk 3420020 / 89167-514 The Labconco Capture Fuming Sys 230v Uk 3420020 is a quality addition to the Labconco lineup. For more great deals on Lab Furniture & Bio-Hoods by Labconco please browse our Labconco Lab Furniture & Bio-Hoods page. Labconco Capture Fuming Sys 230v Uk 3420020 Unit EA