Torq ACT Multiplier Surfboard MULTIPLY YOUR WAVE COUNT The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high performance Thruster model with a slightly lower rockered nose, while keeping the rail and foil low. The resulting hybrid catches waves easily, but also gains speed much more quickly than a narrow noised shortboard and with a razor sharp responsive tail to use it! CONSTRUCTION Torq ACT surfboards are the world's first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin. On any surfboard the resin's function is to hold the fiber in place. It offers little structural integrity of it's own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight. With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight. Usually you can have strength, light weight or a good price. In ACT, you can have all three. ACT boards have a super strong 2 x 4oz + Bamboo reinforcement on the deck and a 6oz + 4oz lay-up on the bottom, but they weigh around the same as a light glassed PU board. Most importantly; they respond better. The feel of these boards is like no other surfboard - they are incredibly responsive. The unhindered flex and zero dead weight means all of the energy that you put through your feet is delivered into the turn with none of the deadening effect from the resin. Fin System Futures Dimensions 5'8 x 19 7/8 x 2 1/4 - 28.8 ltr 6'0 x 20 3/8 x 2 1/2 - 33.6 ltr 6'4 x 20 7/8 x 2 3/4 - 38.8 ltr