Pettit EZ-Poxy Topside Finish Performance EnhancerPettit's EZ-Poxy Performance Enhancer is an additive that increases gloss, harness, and longevity of Pettit solvent-based topside paints. Its advanced formulation reacts with the paint it is mixed in to "cross-link" polymers within the paint film, providing exceptional durability, gloss-retention, scratch resistance, and longevity. Additionally, this paint accelerates dry time by up to 40% and increases hardness by up to 25%. Unlike other two-part urethanes, paints catalyzed with this hardener can be applied over well-adhered one-part finishes. With Pettit EZ-Poxy Performance Enhancer, achieving a high quality, long lasting yacht finish is easy.Recommended for use with the following Pettit Paints: EZ-Poxy, EZ-Decks, EZ-Bilge, Captain's Varnish, Flagship Varnish, High Build Varnish, and Captain's Ultra-Clear Varnish. Do not use EZ-Poxy Performance Enhancer in epoxies, lacquers, two-part polyurethanes, or water-based paint systems.Features: Increases gloss, harness, durability and longevity; Compatible with Pettit solvent-based topside finishes; Increases flow out of brush strokes and roller stipple, providing a high gloss finish; Accelerates dry time by up to 40%; Increases hardness by up to 25%; Raises gloss by up to 10%; Improves resistance to chemicals and solvents; Specifications: Pack Size: 8 oz.; Mix Ratio: 16:1 Paint:Hardener by volume; Curing mechanism: Chemical cure; VOC: 604 g/l; How to Use Pettit EZ-Poxy Performance EnhancerThe substrate and air temperatures must be between 50F and 90F throughout the entire mixing, application, and curing process. For best results when applying multiple coats, EZ-Poxy Performance Enhancer should be added to all the layers. Mix Ratio: 16:1 Paint:Hardener by volume; Application Temp: 50F Min / 90F Max; Stir EZ-Poxy Performance Enhancer and paint or varnish thoroughly before mixing. EZ-Poxy Performance Enhancer should be mixed at a 16:1 ratio of paint to catalyst. The entire 8 ounce can of EZ-Poxy Performance Enhancer should be mixed with a gallon of paint. Add two ounces, or six cap-fulls of hardener per quart. Paints mixed with EZ-Poxy Performance Enhancer do not require an induction time, so once mixed, application should begin immediately.; The mixed paint can be applied by brush and/or roller. DO NOT SPRAY.; Application Tips For brush or roller application, the paint may be thinner 5-10% to aid in flow out and to maintain a wet edge.; In hot weather and when using darker colors, the paint may be thinned up to 20%.; For best results on large, smooth surfaces, roll out using a high density foam roller. Level off with the tip of a brush.; Apply one thin coat per day. After an overnight dry, lightly sand with 320-grit sandpaper and apply a second coat.; Click to Download Pettit EZ-Poxy Performance Enhancer Data Sheet