SeaStar AutoPilot PumpThe SeaStar Autopilot pump is a fixed flow, reversible type set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 & type 2). It can be used as a stand-alone pilot pump or can be mounted to a previously installed SeaStar Power Assist unit and can prevent the need to break into the hydraulic lines.Features Long life DC Motor (i.e. long life brushes).; Compact design.; Simplified installation.; Low power consumption.; ABYC, CE and J1171 compliant.; Superior corrosion resistance; Quiet operation.; Mounting bracket included.; Stand alone or mounts to SeaStar Power Assist unit.; 24" Wire Length | 12 Gauge AWG; Replaces other 12 & 24 volt pumps.; STAND ALONE PILOT PUMP (Can be retro fitted to a SPA unit) Type 1: 12V60cu"/min Part No. AP1219 Type 2: 12V100cu"/min Part No. AP1233 Type 1: 24V60cu"/min Part No. AP2419 Type 2: 24V100cu"/min Part No. AP2433 TECHNICAL Voltage 12 or 24 Volts Fittings Compatible with standard SeaStar Hoses (HO51xx etc.) Oil Compatibility SeaStar Steering Fluid (MIL 5606) Weight 4.9 lbs (2.2kg) Autopilot Pump Sizes Type 1: 60 in3/min (no load) Type 2: 100 in3/min (no load) Max Pressure 1000psi Typical Current Draw(Depending on application) 12 or 24 Volts 12V Type 2: 5 11 amps 24V Type 1: 2 4 amps 24V Type 2: 3 6 amps