Precision Armament TiTrex 260Ti Suppressor, Black The Precision Armament TiTrex 260Ti is a sound-optimized, titanium-core suppressor for 6.5mm and smaller calibers, from 6.5 Creedmoor and 6.5 PRC down to 5.56 NATO and .223 Remington. It works on both bolt-action and semi-auto rifles, and caliber-specific front caps are available to tune sound performance to your host. At just 7.2 ounces for the body, it is built for hunters, precision shooters and anyone running an ultralight rifle. X-CORE Exchangeable Core Technology Most suppressors wear out, lose performance over time and need destructive repairs. The TiTrex is built differently. Precision Armament's patent-pending X-CORE weld-free exchangeable core system lets the entire core be replaced or upgraded while the serialized XBand housing stays the same. That gives the TiTrex an unlimited service life: if a core is damaged, it can be replaced with no cutting or welding, and when new core technology arrives, it can be factory-installed into your existing XBand housing. Core upgrades can also change caliber, material and color. The XBand serialized containment housing is 17-4 stainless steel with an H900 heat treat. It supports the blast chamber, a stress-critical area, and carries the suppressor's identity through every service, exchange or repair. NURBS Baffle Technology At the heart of the TiTrex is Precision Armament's NURBS (Non-Uniform Reconvergent Baffle Stack) technology, an additively manufactured, surface-modeled baffle design. Developed with hybrid surface modeling, acoustic testing and DMLS metal printing, the topology-optimized baffles regulate gas flow and improve heat transfer. The result is lower sound pressure and minimal first-round pop from a short, light can. Lightweight and Magnum Rated The Grade 5 titanium (Ti-6Al-4V) core keeps the body weight at 7.2 ounces, or 9.2 ounces with the mount and front cap. Even with that light weight, the TiTrex is rated for .300 RUM with no barrel-length restrictions. Full-auto use is rated depending on the application. Open, Modular Mounting The OPEN SOURCE mount interface is HUB compatible, so you can run virtually any industry-standard mounting system. The OPEN SOURCE front interface accepts Bravo-pattern front attachments, one of the most widely used front cap patterns. A K-Brake ultracompact brake is included. Its CDC technology gives strong recoil reduction with minimal sound penalty. Engineered, Tested and Proven The TiTrex went through an exhaustive development program before release. The XBand housing went through dozens of design iterations to make sure the core can be exchanged for life. Sound performance was refined through more than a hundred design iterations in a 1 MHz acoustic lab, studying how each internal feature affects peak sound pressure, impulse and first-round pop. Structural strength was optimized with FEA modeling and then validated through destructive testing, including impulse-fatigue cycles, ultra-short-barrel magnum abuse and full-auto thermal trials. Point-of-impact shift studies confirmed minimal influence on bullet flight. The XBand is made from high-strength wrought stainless steel. It reinforces the aft expansion chamber, acts as a containment and crack-arrest housing, and is mechanically retained to the core with permanence comparable to welding. Because the XBand is never altered during service, the core can be replaced, rebuilt or upgraded any number of times while the original serial number stays the same. The titanium core carries an application-dependent full-auto rating. A Light/Limited rating covers controlled automatic fire in short strings with cooling periods, typically 30 to 90 rounds in short bursts or limited magazine dumps, rather than sustained high-volume fire. Key Features Optimized for 6.5mm and smaller calibers X-CORE weld-free exchangeable core for unlimited service life XBand serialized containment housing, 17-4 stainless steel with H900 heat treat NURBS additively manufactured baffle technology Grade 5 titanium core, 7.2 oz body weight Rated for .300 RUM with no barrel-length restrictions HUB-compatible OPEN SOURCE mount interface Bravo-pattern compatible front interface K-Brake ultracompact brake included Black finish Specifications Manufacturer: Precision Armament Model: TiTrex 260Ti Part Number: R10122 UPC: 810112082258 Caliber: 260 (6.5mm and smaller) Core Material: Titanium, Grade 5 Ti-6Al-4V XBand Material: 17-4 stainless steel, H900 heat treat Weight: 7.2 oz (body), 9.2 oz (with mount and front cap) Outside Diameter: 1.65 in Length: 5.9 in (body), 6.2 in (with mount and front cap) Blast Chamber Depth: 1.55 in Mount: OPEN SOURCE, HUB compatible Front: OPEN SOURCE, Bravo-pattern compatible Included: K-Brake ultracompact brake Finish: Black Buying a Suppressor Suppressors are NFA items. Your purchase ships to a licensed dealer, and the transfer requires an approved ATF Form 4 and tax stamp. Check your state and local laws before ordering. See the TiTrex 260Ti in Dark-Ti or browse more Precision Armament products. Frequently Asked Questions What calibers is the TiTrex 260Ti designed for? It is optimized for 6.5mm and smaller calibers, on both bolt-action and semi-auto rifles. What is X-CORE technology? It is a weld-free exchangeable core system. The core can be replaced or upgraded while the serialized XBand housing stays the same, so the suppressor can be repaired or updated indefinitely. How much does it weigh? 7.2 ounces for the body and 9.2 ounces with the mount and front cap. What mounts does it use? The OPEN SOURCE mount interface is HUB compatible, and the front accepts Bravo-pattern attachments. Is it magnum rated? Yes, it is rated for .300 RUM with no barrel-length restrictions. What is included? The suppressor and a K-Brake ultracompact brake.