Redding Reloading Full Length Die Set Features The Redding Full Length Die Set for .300 PRC includes a full length resizing die with a decapping rod assembly and neck expander which resizes fired brass back to proper SAAMI chamber dimensions regardless of the action type the brass was originally fired in. Redding machines its dies on Hardinge Super-Precision lathes capable of holding some of the tightest tolerances in the reloading industry which is why the company can guarantee ammunition loaded with these dies will properly fit a standard chamber. All dies are heat treated in atmospherically controlled furnaces to maintain those tight tolerances and ensure the dies last a lifetime of reloading use. Hand polishing on the internal die profile ensures smooth flawless functioning without case sticking during sizing. The companion seating die includes a bullet guide to keep the bullet properly aligned during the seating stroke a built-in crimp ring for finishing the round and a seating plug matched to the bullet profile for consistent seating depth. Both dies use the industry standard 7/8-14 threaded body so they install directly into any standard single stage or turret press without special fittings. The die box itself doubles as a handy cartridge loading block and storage package and includes a spare decapping pin a hex wrench and a dedicated spot for the shell holder. Finished ultrasonically cleaned and packaged after final inspection this Redding Full Length Die Set is built to deliver precise reliable .300 PRC ammunition for years of reloading. Redding Reloading Full Length Die Set Specifications Manufacturer: Redding Reloading Model: Full Length Die Set Caliber: .300 PRC Die Type: Rifle Set Thread: 7/8-14 Available At: GrabAGun