RCBS Uniflow Powder Measure III Features The RCBS Uniflow III Powder Measure is built around machined reference surfaces that hold exceptionally tight tolerances letting powder pour uniformly from the metering cylinder into the case every time. This consistency is what gives reloaders confidence reload after reload since uniform charges reduce the hazards of overloads caused by clogging when charges are dumped. The measure covers a 0.5 to 95 grain range from one unified metering cylinder and rotor so the same tool handles light pistol charges and heavier rifle loads without swapping components. RCBS recommends pairing the Uniflow III with an accurate powder scale to set the original charge and to periodically verify it during a loading run. The anti-static NG resistant hopper is sized to hold a half pound of extruded powder or a third of a pound of flake powder keeping a reloading session moving without constant refilling. Its threaded hopper design unscrews easily for cleaning so switching powder types or clearing residue is a quick task rather than a chore. The green hopper housing and ambidextrous handle make the Uniflow III comfortable to operate from either side of the bench. Backed by RCBS s limited lifetime warranty this powder measure is built to be a long-term fixture of a reloading setup. RCBS Uniflow Powder Measure III Specifications Manufacturer: RCBS Model: Uniflow Powder Measure III Capacity: Up to 95 Grain Color: Green Pieces: 4 Weight: 3.1 lbs Available At: GrabAGun