Lee Precision Inline Die Features The Lee Inline Die for .45 caliber automates bullet feeding during the reloading process accepting bullet diameters from .435 to .460 inches to cover cartridges ranging from .45 ACP through .45 Colt. Its all steel construction centers on a ball bearing escapement mechanism paired with a spring loaded positive ball carrier return a design that ensures reliable operation feed after feed without jamming or misfeeding bullets. The die reliably handles jacketed cast powder coated and copper plated bullets giving reloaders flexibility in bullet selection without needing a different feeding tool for each bullet type. Configurable for both long and short bullet lengths this inline die adapts to a variety of .45 caliber bullet profiles a reloader might choose to run. Because each die is caliber specific there is nothing to change or adjust between uses beyond the simple initial setup of placing a case in the press and screwing the die in until it drops a bullet then adding a half turn. This straightforward calibration process means once set the die performs consistently without ongoing fiddling. The die includes a support tab for the optional multi tube feed magazine which can be added separately to pre load over 100 bullets in small or medium capacity for high volume loading sessions. Built to thread into any press with standard 7/8-14 threads this Inline Die gives .45 caliber reloaders a dependable way to speed up bullet seating on the production line. Lee Precision Inline Die Specifications Manufacturer: Lee Precision Model: Inline Die Caliber: .45 Caliber Bullet Diameter Range: .435 to .460 Die Type: Inline Material: Steel Press Thread: 7/8-14 Available At: GrabAGun