Stockton X Adam's Rinse And Seal Seal and protect your ride in minutes. Rinse and Seal delivers a touch-free, high-gloss finish, eliminating swirl risks. Perfect for quick protection or enhancing existing coatings. Features: Mist On / Rinse Off complete protectant Protects surfaces for 1-3 months depending on use Quickly and easily coat all exterior surfaces Amplifies slickness, gloss, color and hydrophobic behavior No dye added Watermelon sugar scented Concentrated solution: Dilute 1:9 with water before use Pro Tip: 1 cap full is 0.4oz (For a 16oz bottle, use 4 capfuls) Cleaning Instructions Step 1: Dilute the concentrate with fresh water at a 1:9 ratio (1 part concentrate with 9 parts water for a total of 10 parts). Step 2: Following washing the bike and while it is still wet, mist the diluted Rinse and Seal solution onto all exterior surfaces working one section at a time. Step 3: Immediately rinse off the excess solution thoroughly and note the instantaneous hydrophobic behavior on the surface. Step 4: Either towel dry by hand or use forced air to finish drying the bike completely. Common Sense Warning Fully Allow Bike TO Cool Before Washing. If it's too hot to touch it's too hot to wash. Not only do you risk hurting yourself but you also risk ruining the finish of your bike/exhaust/engine if the bike is hot while washing. Rinse and Seal is a concentrated solution and requires dilution prior to use.