Easton Bowhunter 400 Features The Easton Bowhunter shaft is engineered around a reduced 6.5mm diameter carbon construction that cuts wind drag and improves penetration compared to standard diameter arrows. At 9.3 grains per inch the shaft carries enough mass to retain kinetic energy on impact while still flying flat across hunting distances. A straightness factor of plus or minus .006 inches keeps every shaft in the 6-pack flying true which matters when a hunter only gets one chance at a shot. The weight tolerance of 1.0 grain across the set means each arrow performs consistently with the others so point of impact stays predictable from shaft to shaft. Each Easton Bowhunter arrow ships with Microlite nocks pre-installed saving the hunter a step at the bench and ensuring proper nock fit and alignment from the factory. The 6.5/CB insert system is included giving shooters a ready mounting point for broadheads or field points without searching for compatible hardware separately. Factory-installed 2 inch Bully Vanes provide stable fletching for consistent arrow flight through brush and open terrain alike. Packaged as a 6-pack this set gives bowhunters a full quiver-ready batch of matched carbon arrows for the 2026 season. Easton Bowhunter 400 Specifications Manufacturer: Easton Model: Bowhunter 400 Type: Arrows Diameter: 6.5mm Material: 6.5mm Reduced Diameter Carbon Grain: 9.3 Grains Per Inch Straightness Factor: +/- .006 Weight Tolerance: +/- 1.0 Gr Other Features: Pre-Installed Microlite Nocks 6.5/CB Inserts Included 2 Bully Vanes Available At: GrabAGun