The Rigid Conduit gong stand kit gives you everything you need but the rigid conduit. This saves you a ton of money on shipping and manufacturing costs. All you need is 1" rigid conduit, a bit of handy work, and you have a stand!! This also allows you to adjust the height and width of the stand to your specific needs. This may be useful if you shoot in hilly terrain. For mounting hardware take a look out our compatible products below! Steel Chain Mounting Kit: CLICK HERE! Rubber Chain Mounting Kit: CLICK HERE! We do not recommend using the stand with targets over 75lbs or with rifles larger than .338. NOTE: The kit DOES NOT include the rigid conduit. You will need to buy the rigid conduit at your local hardware store. The stand was only designed to work with rigid conduit. It WILL NOT work with other conduit or plumbing pipe. NOTE: This kit requires the following operations to be performed: cut tube to length, measure 1.5" from end, drill a 5/16" hole, and deburr the ends. If you are unsure of how to perform any of these operations you may want to consider one of our standard gong stands(36x36 or 60x60). Detailed instructions are included with the kit. Some of you may be asking what the difference is between rigid conduit and EMT. Both have the same inside dimension, but rigid conduit is much thicker. This allows the rigid conduit to hold much more weight. It also weighs and costs more than the EMT. Refer to the item descriptions for target weight and cartridge capacities.