Mass Combi Ultra 24V/3500W - 100A - 230VThe Mass Combi Ultra series comprises several models, varying from 3000 W to 3500 W. For higher capacities up to 35 kW the Combi Ultra can be used in parallel or 3-phase configurations. An efficient and integrated solar charge regulator helps make the most of your solar panels.The Mass Combi Ultra is equipped with the latest technologies. The new inverter technology ensures a uniquely low stand-by use, while an ultra-fast Digital Signal Processor guarantees seamless switching between all available energy sources. Power Assist prevents power dips and failures, even with a weak electricity connection or small generator. Moreover, all Mass Combi Ultra models are equipped with MasterBus.Higher yield from solar energy At Mastervolt we used our knowledge gained in the grid connected solar sector to make a super-efficient built-in MPPT solar charge regulator. Compared to most solar charge regulators on the market, the MPPT offers up to 30 % more yield from solar panels. The solar panels power 'hidden' consumers and keep your batteries in optimal condition.'Pro' ModelsFor professional applications. Mastervolt offers a 'Pro' model, featuring all Ultra functions, but without the solar input and secondary battery charger.Quiet operationThe Mass Combi Ultra and Mass Combi Pro can provide up to 50 % of the charging current or inverter capacity without fan cooling. This is perfect for night-time operation; if little power is consumed, the fan stops turning and goes silent. When maximum capacity is required, or the ambient temperature is very high, the Active Optima Cooling concept regulates the fan speed in a linear way, ensuring that it never spins too fast or makes any unnecessary ticking noises.Parallel and 3-phase operationThe Mass Combi Ultra functionality goes beyond stand-alone operation, the design also allows parallel and 3-phase configurations for larger applications up to 35 kW. For larger systems, an external transfer system is required.Dual AC inputs and outputsThe Mass Combi Ultra and Mass Combi Pro have inputs for generator or mains supply, each optimized for the power source. A robust intelligent transfer system switches seamlessly between AC power, generator and inverter, and ensures a constant power supply. Flickering lights or failure of electronic equipment belong to the past. Separate AC outputs provide the ability to power heavy users via mains and/or generator.FeaturesFor professional and semi-professional useQuiet, powerful inverter with 200 % peak powerCompact, lightweight and hum-free thanks to HF technologyPure sine wave voltage prevents malfunctions and damage to sensitive equipment such as adaptersHigh yield and more power from your batteriesIntelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery lifePower Assist: prevents blown fusesA dynamic battery voltage window allows you to enjoy AC power for longer without damaging your batteriesActive Optima Cooling concept prevents unnecessary fan noiseCharges two individual battery banks simultaneouslyAn integrated MPPT solar charge controller allows for 30 % more yield from solar power for charging the batteriesQuick installation and reliable professional connectionsCE, ABYC and RMRS certifiedSpecifications:Sine Wave InverterNominal DC voltage:24 V (19-32 V)Output voltage: 180-260 V, adjustableOutput frequency: 50/60 Hz (A 0.005 %), configurableOutput waveform: true sineContinuous power at 40 AdegC / 104 AdegF, cos phi 1: 3500 WMax. peak load: 7000WMax. efficiency: a 92 %Max. ripple on DC (battery at full load): < 5 %No-load power consumption on DC (ON/inverter OFF/OFF): 16 W / 4 W / 0 WEnergy saving mode consumption: 7 WParallel configuration: yes, up to 10 units (for larger systems, an external transfer system is required)3-Phase configuration: yes, up to 3x3Synchronize with mains/generator: yesBattery ChargerInput voltage range: 184-275 VMax. input current: 16 AMax. charge current at 40 AdegC / 104 AdegF: 100 A at 28.5 V, adjustableSecondary charger output voltage: 12/24 V selectableSecondary charger output current: 10 ABattery temperature sensor: yes, includedBattery voltage sense: through MasterShunt, otherwise automatic compensationTransfer SystemAC input (generator): 50 A (switched)AC input (mains): 30 A (switched)AC output 1: 67 AAC output 2: 50 A (switched)AC input fuse: noTransfer speed: seamless (< 1 ms)Transfer voltage range: 184-275 V, adjustableTransfer frequency range: 35-68 Hz, adjustableSolar Input (DC)Input voltage range: 25-100 VMax. PV peak power: 500 WpMax. input current: 19 AMax. charge current: 15 A at 28.5 VMPP Tracker: full power at 35-80 VGeneralDisplay/read-out: LED displayDimensions, hxwxd: 472 x 318 x 178 mm / 18.6 x 12.5 x 7.0 inchWeight: 15.3 kg / 33.7 lbApprovals: CE, ABYC, RMRSTechnical specificationsCharge characteristic: IUoUo, automatic 3-traps+ voor AGM/Gel/MLI/nat/tractie/spiraalRecommended battery capacity: 200-600 Ah (based on gel batteries, may differ for other types)Ground relay: yes, configurableTemperature range (ambient temp.): -25 AdegC to 60 AdegC, derating > 40 AdegC / -13 AdegF to 140 AdegFCooling: vario fanProtection degree: IP23 (vertical mounting)Safety class: IEC protection class IHumidity protection: conformal coating, max. 95 % relative humidity, non condensingProtections: over temperature, overload, short circuit, high/low battery voltagePower Assist: yesMasterBus compatible: yesWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.