Standard Flow Marine Ballast Pump - 12 GPM & 12 VDC - Bronze HousingThe Shurflo Standard Ballast Pump was specially designed and developed for high capacity ballast tank applications in ski and wake boats, providing rapid fill and drain rates in a readily adaptable configuration, able to operate on a 25 Amp circuit. The high efficiency, high torque motor in combination with a high modulus neoprene compound impeller provide fast priming, long life, and consistent performance. Close internal tolerances help reduce leak back when the pump is mounted below the ballast tank. The Standard Ballast is built on the latest Shurflo motor series which includes fully sealed heavy die cast end bells, electro-coat finish throughout, and a steel mounting plate for reliable performance and durability in engine compartment conditions.Features:2 VDC Sealed Corrosion Resistant Electro-Coated Motor14 AWG Lead WiresReversible Flexible ImpellerBronze Pump BodySelf-Primes up to 4 feet verticallyPorts: 1/2" Internal Pipe Threads,1" External Hose BarbIgnition ProtectedCE and IMCI certificationPump Design:Type: Reversible Flexible ImpellerPorts: 1/2" Internal Pipe Threads, 1" External Hose BarbLiquid: 200degF [93degC] MaxPrime: 4 Feet [1.2 M]Run Dry: Not RecommendedElectrical:Motor: 12V DC Permanent Magnet,Intermittent DutyProtection: Need External Fuse (not supplied)Leads (Red): 14.5" [0.36M] Tinned 14 AWGLeads (Black): 12.5" [0.31M] Tinned 14 AWGFuse: 25 Amp Fuse RecommendedControl: No Control - External Switch requiredMaterials:Housings: BronzeImpeller: NeopreneHardware: Brass/StainlessAgency Approvals:USCG Electrical Standards 183.410ISO 8846 Marine for IGNITION PROTECTION on gasoline power vesselsCE and IMCI certification