Forster Bench Rest Seater Die Features Inside the Forster Bench Rest Seater Die the close fitting chamber captures the case and the bullet in alignment before the seating stem ever applies pressure. Conventional seating dies use a fixed chamber and seating system that can start a bullet into the case neck at a slight angle and once that angle is introduced it stays in the loaded round as runout. Because the Forster design supports the case the bullet and the stem at the same time the bullet is pushed straight into the neck instead of being tipped on the way in. For handloaders chasing tighter groups that support system is the difference between ammunition that measures straight and ammunition that only looks straight. Every Forster die body is machined from the finest quality steel and hand polished on both sides of heat treating which leaves a smooth working surface that will not scuff case necks or bullet jackets over thousands of rounds. The Forster Cross Bolt Die Locking Ring clamps the two ends of a split ring together rather than driving a screw directly into the threads of the die so the threads are never marred and a recorded setting returns exactly where it was left. That matters most to reloaders who share a single press across several cartridges and need each die to go back to a known depth without reworking the setup. For the .308 Win reloader who wants a seating die that protects both the brass and its own settings the Forster Bench Rest Seater Die is available for sale at GrabAGun. Forster Bench Rest Seater Die Specifications Brand: Forster Model: Bench Rest Seater Die Die Style: Bullet Seating Die Caliber: .308 Win Material: Steel Locking Ring: Forster Cross Bolt Die Locking Ring Available At: GrabAGun