Purpose built to create the most amount of light from the smallest, most low-profile, housing possible, the B6 Brake Light is unbelievably bright but will practically disappear once installed. Complete with an integrated run-brake circuit, the three-wire B6 pod with run at 50% intensity on the red wire and switch to 100% full intensity through the orange wire. The B6 brake light pods are compatible with a variety of mounting kits that enable the pods to be mounted below a license plate , on the side of a license plate or flush mounted onto any flat surface. Complete with a waterproof micro connector and included posi-taps, the B6 is super easy to connect into any vehicles brake light circuit. The B6 also connects directly to the DENALI CANsmart™ Controller to enable programmable flash pattern braking and deceleration activated auto brake light functionality making the B6 the brightest and most feature-rich auxiliary brake light on the market. Features Dual Circuit: Running and brake 180 degree viewing angle Six high power LEDs Low 6 watt power consumption Low profile design Easy to connect to vehicle brake circuit Specs Power Draw: 0.5 Amp Voltage: 12V DC Size: 4.4" x 1.1" x 0.42" Weight: 0.15 lbs Raw Lumens: 870 IP67 Waterproof What's In The Box? (x1) DENALI Red B6 Brake Light Visibility Pod (x1) Wiring Pigtail (x3) Posi-Tap Connectors Instruction Manual Download PDF Instruction Manual (English) PDF Instruction Manual (French)