GrovTec USA Suppressor Cover Features The GrovTec USA Suppressor Cover uses multi layer construction built from heat resistant materials to create a barrier between the shooter and the extreme heat a suppressor generates after moderate to heavy use. It carries a continuous temperature rating of 450 degrees and can handle up to 600 degrees during brief intermittent spikes giving a wide safety margin during an active shooting session. This heat management reduces the risk of accidental burns when handling the suppressor a barrel or a handguard positioned close to the can. High temperature cordage is used to secure the cover tightly in place preventing it from sliding or loosening as the suppressor heats and cools. Sized at 6 inches long by 8 inches wide the cover is designed to fit most common suppressors up to 1.75 inches in diameter with overlap recommended for a secure fit on slimmer cans. Because the cover is not full auto rated GrovTec recommends allowing about 30 minutes of cool down time before handling the suppressor after moderate use protecting both the cover and the user from excessive heat exposure. Exceeding the stated temperature ratings can shorten the life of the cover and lead to melting burning or marking of both the cover and suppressor. Finished in black the GrovTec USA Suppressor Cover is a practical accessory for suppressor owners who shoot extended strings and want extra protection built into their setup. GrovTec USA Suppressor Cover Specifications Manufacturer: GrovTec USA Model: Suppressor Cover Color: Black Length: 6 Compatible Hosts: Suppressors up to 1.75 Diameter Temperature Rating: 450 Degrees Continuous 600 Degrees Max Intermittent Available At: GrabAGun