Victron Energy Phoenix Inverters allow you to power domestic equipment requiring 120V AC using 'leisure' or 'automotive' batteries rated at 12V DC. Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected. High Start-Up PowerNeeded to start loads such as power converters for LED lamps, halogen lamps, or electric tools. ECO ModeWhen in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote On/OffA remote on/off switch can be connected to a two-pole connector or between battery plus and the left-hand contact of the two-pole connector. User-Configurable SettingsPhoenix has a communication port providing access to status information, alarms, and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via the VictronConnect App. SpecificationsOutput Socket: NEMA GFCIContinuous Power: 800VAPeak Power: 1500WWeight: 12 lbs. Dimensions: 4.1"H x 9.1"W x 12.8"D Overload, temperature, & short-circuit protected Start-up power needed for high start loads ECO mode switches inverter to standby when load falls below preset value | Expion360 Victron Energy Phoenix Inverter 12/800 120V VE. Direct GFCI