MADE IN USA Militec-1 Synthetic Rust Preventative and Metal Conditioner is a synthetic metal conditioner used by our troops in harsh environments. This rust preventative and metal conditioner provides dry and constant lubrication that prevents jamming and foreign material build-up. Militec-1 bonds with the metal to inhibit corrosion and to make cleaning easier. Technical Information: Militec-1 Synthetic Rust Preventative and Metal Conditioner Notes: Synthetic-based metal conditioner Viscosity equal to SAE 10 weight oil Contains no solids, PTFE, solvents, metals, parrafins and does not require agitation before use Non-hazardous, non-toxic, non-combustible Protects metal surfaces with a constant impregnated molecular bond, works within the molecular structure of metal and non-metallic firearm surfaces Uses: Rust and corrosion protection Firearm lubrication Application Instructions (per Militec-1): Initial treatment, step one: when firearm is clean and dry, apply a light film to all surfaces including the bore. Burnish/polish Militec-1 into exterior surfaces by rubbing rapidly using a cloth lightly dampened with Militec-1. Sparingly apply drops into the action, concentrating on springs, moving parts and metal-to-metal contact areas. Apply to magazine interior and exterior. Leave a very light film of Militec-1 on all surfaces during reassembly. Step two, firing: fire the firearm enough for it to reach operating temperatures. Militec-1 will continue to impregnate metal through the next two or three applications when the firearm is hot. After complete applications, the firearm surfaces will be self-lubricating. If exposure to dust, sand or extreme cold is encountered, wipe away any excess Militec-1. Firearm will continue to be lubricated. For firearm storage, leave a light coating on all surfaces of the firearm.