The Unknown Munitions Premier Picatinny Scope Rings were built by hunters, for hunters. These rings have been drop tested to ensure your scope never loses its zero after impact. The recoil lug and clamp are machined from grade 5 titanium and all the hardware has a nitride finish to prevent any rust.FeaturesBlue Scope level built in to the rear ring to help with easy installationType 3 Hardcoat Anodize on all Aluminum Surfaces9/64" Drive Bit and Blue Thread Locker IncludedInstallation InstructionsAll torque specs are listed as inch-pounds. Ensure all screws are torqued to specification prior to shooting. Degrease all screws prior to installation. Use of blue Thread Locker is acceptable.Unscrew the (4) 9/64" Socket Head screws from each ring cap with the included driver bit and set aside. Loosen the (2) screws from each picatinny clamp just enough to install on your rail. Place rings on your rail while paying attention to eye relief and scope tube spacing.Once you're ...