Interlux Fiberglass Bottomkote Aqua Antifouling Boat Bottom PaintFor a tough, eco-friendly antifouling solution, you can't beat Interlux Fiberglass Bottomkote it delivers excellent protection with a smooth, durable finish. This water-based formula resists barnacles and algae while providing fast-drying, low-odor application perfect for DIY boaters. It's easy to clean up with soap and water and adheres well to fiberglass hulls, ensuring long-lasting performance in both saltwater and freshwater. Interlux Fiberglass Bottomkote has a hard, fast-drying finish that minimizes paint buildup, making future maintenance a breeze. Available in blue or black, it's an ideal choice for boaters looking for reliable antifouling without the harsh solvents. Solid protection against all types of fouling, including zebra muscles; Colorfast durable finish; Reduced emissions, low odor; Easy clean up with soap and water; Thinner film, less paint build-up; Only thin if necessary, and if so, do not thin more than 10% by volume. Thin with water. Specifications: Finish: Matte; Number of Coats: 2-3; Associated Products Interlux Fiberglass Solvent Wash 202-To clean bare fiberglass prior to application.; Interlux Fiberglass Surface Prep YMA601-Water Base cleaner for bare fiberglass. ; Interlux Watertite YAV135-Epoxy Filler for filling and fairing.; ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY*** ------------------------------------------------------------------------------------------------------------------How To ApplyAPPLICATION DATA METHOD: Brush, Conventional Spray, Roller NUMBER OF COATS: 2-3 DRY FILM THICKNESS PER COAT: 2 mils (5.4 wet mils)COVERAGE: 400 sq. ft/gal. APPLICATION TEMP: 40F Min. / 95F Max.THINNER: WaterDRY TIMES:TempTo TouchTo RecoatTo Launch95F1/2 HR2 HR6 HR73F2 HR4 HR6 HR59F2 HR5 HR8 HRPREVIOUSLY PAINTED SURFACES: In Good Condition Remove old flaking paint. Wet sand with 80 grade (grit) paper. Rinse with fresh water and allow to dry. In Poor Condition Remove antifouling paint in poor condition with Interstrip 299E. BARE FIBERGLASS: Scrub the surface thoroughly with soap and water using a stiff brush. Apply Fiberglass Surface Prep YMA601V with a 3/8"" nap roller on surface to be de-waxed, work in 10x10 foot areas. Ensure YMA601V is removed before drying. Scrub Fiberglass Surface Prep YMA601V using a 3M Doodlebug and a brown Scotch-Brite pad. Once all areas have been thoroughly scrubbed, use wet rags or spray down with high pressure rinse to remove all traces of Fiberglass Surface Prep YMA601V. Change rags frequently. Wipe down with clean cloths. Repeat the cleaning process until water no longer beads. Surface must be clean and dry prior to application of Fiberglass Bottomkote Aqua. BARE FIBERGLASS - NO SAND: Prepare surface as described above. Apply the Fiberglass Bottomkote Aqua within 4 hours of cleaning. If this time is exceeded, rinse with fresh water and allow to dry. If exceeding 2 months between de-waxing and painting, repeat cleaning prior to application of Fiberglass Bottomkote Aqua.BARE WOOD: Clean with Special Thinner 216. Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Repair any defects with Watertite Epoxy Filler. Lightly sand and wipe clean. Surface must be free from all contamination. Fill seams, if necessary, with Seam Compound Brown 30. Apply first coat of Fiberglass Bottomkote Aqua thinned with clean water (do not add more than 10% by volume). UNDERWATER METALS: All substrates must be primed, clean and dry. All preparation for bare substrates is covered on the appropriate primer labels. Contact Interlux for further details.DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.APPLICATION INFORMATION: Do not apply thin coats. If during application the brush pulls or the roller drags, add small increments of water to improve handling (do not add more than 10% by volume). Apply 2 coats for full protection. BARE WOOD: Apply 3 coats of Fiberglass Bottomkote Aqua. Fiberglass Bottomkote Aqua can be applied to most popular antifouling paints as long as the old coating has been aged, is tightly adhered and is in sound condition. Do not apply Fiberglass Bottomkote Aqua over soft or tin-based copolymer antifoulings. Do not use on aluminum. Click here to download Interlux Fiberglass Bottomkote Aqua Data Sheet