Oneup Components on Sale

$199.00$209.00 OneUp went to great lengths to make sure the OneUp Components V2 Dropper Post had the shortest total length and lowest stack height on the market. If you're having trouble getting your dropper post low enough or past a bend or seam in the seat tube, the OneUp may be the way to go. This post is cable (not hydraulic) actuated, so you won't have to take your bike apart to install it. Travel Adjust Shims Allow You to Custom Tune Your Post (20mm Increments) Cable Actuated for Easy Installation and A Simple No Bleed Remote Ergonomic Remote Paddle Position Reliable Sealed Cartridge Internals User Replaceable Catridge ($60 USD) | OneUp Components V2 Dropper Post 2020>

$24.50$25.00 Get a handle on your sketchy style with OneUp Components Lock-On Grips. They're the missing link to taming those scary sections of trail, with a shape that's made to yank. 97g per Pair Length 136mm Diameter 30mm Super Tacky 20A Compound | OneUp Components Lock-On Grips 2020>

$5.00 The OneUp Components Bar Decal Sheet - you know what to do! OneUp Does Not Recommend Applying Decals to Animals | OneUp Components Bar Decal Sheet 2019>

$35.00 Use the OneUp Components EDC Tap Kit to thread the top end of your compatible fork in order to use the OneUp EDC top cap. Fork Requirements The EDC Top Cap Kit is only compatible with 1.5" Tapered mountain bike forks with an aluminum steerer tube. Carbon and Steel steerer tube forks are NOT compatible. To install EDC in your fork you must have at least 3mm of steerer tube above your stem when installed and use a minimum 5mm headset spacer above your stem. A 10mm headset spacer stack above your stem is recommended. For complete compatibility specs, see: https://www.oneupcomponents.com/pages/fork-compatibility Includes Star Nut Puller / "Go No-Go" Gauge, Tap and Tap Guide. (A tap is a common cutting tool used to manufacture/cut internal threads). | OneUp Components EDC Tap Kit 2020>

$138.00 The OneUp Components Carbon 35 Handlebar uses a large diameter 35mm clamp and center section combined with a carefully ovalized shape in the transition zone to create a bar with "best of all worlds" control and compliance. Tested against other popular carbon bars and foam injected aluminum bars, the increases in steering stiffness AND vertical compliance were measurably impressive. If big descents are your jam but your body could use some help with the vibrations, check out the OneUp Carbon 35 and see what all the talk is about. 35mm Rise 35mm Diameter Max Control Torque 5Nm Max Stem Clamp Width 65mm Carbon Fiber | OneUp Components 35 Handlebar 2019>

$209.00 FeaturesTravel adjust shims(included) so you can custom tune and dial in your perfect lengthCable actuation for easy installation and no bleedingShortest stack height and the shortest total length of any dropperIncreased bushing overlap and increased durabilitySpecificationsAvailable Travels120, 150, 180, 210mmAvailable Diameters30.9, 31.6mmOffsetZeroCable RoutingInternalLever TypeCable Clamping Remote Only RequiredLever IncludedNoIntended UseTrail, All-Mountain, EnduroClaimed Weight435g (120, 30.9)In the BoxSeatpost, Cable Bushing, Owners ManualUseful Links-Key MeasurementsA: Travel120mm150mm180mm210mmB: Overall Length345mm405mm465mm525mmC:Max. Insertion Length207mm237mm267mm297mmD:Min. Insertion Length90mm90mm120mm150mmE: Usable Height255mm315mm345mm375mm | OneUp Components Dropper Seatpost V2 210MM, 30.9mm>

$85.00 The perfect complement to the OneUp Carbon 35 stem, the OneUp Components EDC Stem is machined from 6061-T6 aluminum and black anodized. Available in 35mm or 50mm lengths. Compatible with Existing Threaded EDC Top Caps, for People Who've Already Threaded Their Steerer Tube Bar Clamp Width 55mm Can Be Used with a Regular Star Nut and Top Cap Stack Height 38.5mm 6061-T6 Aluminum | OneUp Components EDC Stem 2019>

$49.00 Simple things sometimes make all the difference. The OneUp Components V2 Dropper Post Lever mirrors the upshift lever position for your derailleur, but on the left side, unlike some remote dropper levers that are much harder (and slower) to reach. Built from cast aluminum with an oversized bearing, the OneUp lever means never hesitating again when you go to move your seatpost. 22.2 All Other Groups Including 12 Speed XT M8100, SLX M7100 and All 10 Speed Shimano I-Spec II 11 Speed XTR M9000, XT M8000, SLX M8000 Only Compatible with All Cable Actuated Dropper Posts I-Spec EV/MMX SRAM MMX and 12 Speed XTR M9100 Only Includes Cable and Housing | OneUp Components V2 Dropper Post Lever 2019>

$125.00 Stable, grippy, and thin: OneUp Components Aluminum Pedals offer the full package, no matter what style of riding you do. These are beefy enough for DJ and DH use, but stealthy and light enough for all-day pedaling duty. Easy to maintain, they're also fully serviceable. Fully Sealed and Serviceable Design with Built-In Bearing Extractor 10 Rear Loading Custom Hexagonal Removable Pins per Side Ultra Thin Leading Edge Chamfered Design, 8.3 - 12mm Height Chromoly Steel Axle 6061-T6 Aluminum Platform | OneUp Components Aluminum Pedals 2019>

$49.00 With their subtle convexity, thin edge, and wide platform, the OneUp Components Composite Pedals bring the grip. They're light on your wallet, too, so you can hold on to more of your paycheck. Height 18.5mm (13.3mm at Leading Edge) 10 Rear-Loading Steel Pins per Side Platform Size 115 x 105mm Nylon Composite Black Chromoly Steel Axle | OneUp Components Composite Pedals 2020>

$30.00 A OneUp Components EDC Stem Cap and Preload Kit readies your bike for the stealthiest of tool carry options: the EDC system. This ultra-light headset top cap sits atop a plug that'll accept EDC tool storage, and features a drain hole that keeps crud out of your steer tube. Top Cap Compatible with All 1-1/8" Aluminum Steerer Tubes Aluminum Lightweight Headset Top Cap 4.2g EDC Steerer Plug Required for EDC tool storage, this plug is compatible with most aluminum tapered steerer tubes. Drain Hole Keep crud out of your steerer. | OneUp Components EDC Stem Cap and Preload Kit 2020>

$59.00 The OneUp Components EDC Pump is a super high efficiency mini pump with enough capacity to inflate a typical mountain bike tube in less time than it takes to eat your lunch. The EDC Pump pushes 100 cc of air with each push, twice as much as many mini pumps, and is designed to hold the OneUp EDC Tool and a 20 gram CO2 cartridge (or a supplied storage capsule). 100cc Pump holds EDC Tool & 20g CO2 or EDC Tool & the Storage Capsule 6061 T6 Aluminum To Use CO2 Inflator Thread CO2 cartridge fully onto inflator head. Press inflator head onto Presta valve stem. To inflate, back off CO2 cartridge a half turn - tighten CO2 cartridge to stop inflation. 1.25" x 10" Conventional Manual Pump Operation Press inflator head onto Presta valve stem, pump by extending and compressing pump handle. | OneUp Components EDC Pump 2019>