Interlux VC-17M Extra Antifouling Bottom Paint
Interlux VC-17M Extra Antifouling Bottom Paint, Interlux VC-17M Extra Antifouling Boat Bottom PaintIdeal for racing and cruising boats, the Interlux VC-17M is a high-performance antifouling paint that provides a thin film finish with its specially formulated fluoro micro-additive. This additive reduces friction and drag, two enemies of racing boats. VC17M dries quickly to a hard super smooth racing surface. The Interlux VC-17M provides a finish that with other products would take days with laborious sanding and reapplying. One coat is eighth times thinner than traditional boat bottom paint. VC-17M is made with metallic copper formula and Biolux technology to protect against all types of fouling including zebra mussels, algae, and more.Interlux VC-17M is available in quart size and three popular colors. Note color may change after several weeks of immersion. (See chart below) Application of the VC-17M is easy and drying time is minimal. This means less downtime and quicker re-launch of your vessel. This product can also be used on inflatables to help increase the longevity of your inflatables.Features: Interlux VC-17m bottom paint provides thin film antifouling protection- ideal for racing sailboats and powerboats; Fluoro micro-additive produces low friction; Best for use in fresh and low-fouling salt water; Recommended for Inflatables; Biolux Technology will block both slime and algae growth; Pack Size: 1 US Quart. Not Available in Gallons.Colors Available: YBA405 Original Brown, YBA406 Blue, YBA407 RedNote: VC 17m Extra changes color after several weeks of immersion. YBA405 (Original): At application - copper bronze. Changes to brownish gray.; YBA406 (Blue): At application - dark copper bronze. Changes to dark blue.; YBA407 (Red): At application - reddish copper bronze. Changes to bright burnt red.; Associated Products: Special Thinner 216 - To ease the application; Fiberglass Solvent Wash 202 - To clean bare fiberglass prior to application; Fiberglass Surface Prep YMA601 - Water based cleaner for bare fiberglass; Product Compatibility: Interlux VC 17m is compatible with all antifouling paints. For best results from VC 17m antifouling bottom paint, be sure to first remove all soft paints and any paint in poor condition. Hard paints that are in good condition may be overcoated with VC 17m but must be sanded thoroughly to a smooth surface prior to applying VC 17m. Sand first with 80-grit sandpaper and work successively up the grades to 320-grit sandpaper.How to Apply Interlux VC17M ExtraIn low fouling, cold saltwater, three coats are applied the first season, then two coats each season after. For boats in freshwater, apply two coats initially, then one coat every season thereafter. Application Method: Airless Spray or Roller; Number of Coats: 2 Coats Minimum; Coverage: 85 sq. ft. / quart (roller); Application Temp: 45F Min. / 95F Max.; Thinner: Interlux 216 Special Thinner 10% by volume maximum; Apply VC17m Extra using a short nap roller or 4-6" airless spray gun (full pressure, 60-70 thou. tip). For rollers, add up to 10% thinner for ease of application. If rolling, use small amounts poured into a steel roller tray. Roll quickly and in one direction only. If using a sprayer, keep the nozzle 6-8 inches from the hull. NOTE: Do not use conventional spray equipment as this may result in dry spray.Dry TimesTempTouch DryOvercoating TimeLaunch Time59F5 mins10 mins20 mins73F3 mins10 mins15 mins95F2 mins10 mins10 minsSurface PreparationSurfaces previously painted with VC 17m Extra with Biolux do not need to be sanded. Previously Painted Surfaces: Surface must be clean and dry prior to application of VC 17m Extra with Biolux. Sand areas that are loose or flaking with 320 grade (grit) paper.; Clean with Special Thinner 216. With conventional antifouling paint Removal is best but if this is not possible, start sanding with 80 grade (grit) paper and progressively sand with finer grades until the final sanding with 320 grade (grit).; Remove sanding residue.; Bare Fiberglass: Begin by scrubbing well using soap and water and a stiff brush.; Rinse with fresh water. Wipe with Fiberglass Solvent Wash 202.; Sand with 320 grade (grit) paper. Wipe clean.; Bare Wood: Wipe clean. Sand surface with 80-100 grit sandpaper and remove sanding residue.; Steel Hulls: (Keels & Hulls) Blast to near white metal surface (Sa 2).; Clean thoroughly with Fiberglass Solvent Wash 202; Overcoat within one hour with InterProtect 2000E thinned 10-15% with Reducing Solvent 2316N; Application Information Performance of the paint relies directly on the care taken in surface preparation, the application technique, and the number of coats applied.; It is important for performance to ensure that uniform film is achieved and the recommended number of coats are applied; Apply to clean, dry, properly prepared surfaces only. Bare surfaces must be sanded.; Do not apply VC 17m Extra with Biolux over graphite antifoulings. Do not apply over soft antifouling paints.; Do not apply VC 17m Extra with Biolux over aluminum.; Click here to download VC 17m Extra with Biolux Technical Datasheet