Interlux Watertite 2-Part Epoxy Marine Filler
Interlux Watertite 2-Part Epoxy Marine Filler, Interlux Watertite 2-Part Epoxy Marine Filler CompoundInterlux Watertite is a quick drying 2-part epoxy filler suitable for use on Fiberglass, Metals, Epoxy and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs. It has a long easy-to-sand window and can be applied to a thickness of 3/4" without sagging. Its superior spreadability makes it an ideal glazing compound for filling small nicks and scratches.Features: Very fast drying; Simple 1:1 mixing ratio; High strength and adhesion properties; Use above and below the waterline; Fill up to 3/4" without sagging; Specifications: Application Area: Above and below water; Finish: Matte; Number of Coats: As required; Pack sizes: 500 ml / 1 Lt; ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***How To Apply Interlux Watertite Epoxy Marine Filler Application Data Method: Spatula / Putty Knife; Dry Film Thickness per Coat: 63.5 mils ; Coverage: 25 sq. ft/gal.; Application Temp: 45F Min. / 95F Max.; Thinner: Do Not Thin; DRY TIMES:TempTo TouchSandableTo LaunchPot LifeTo Recoat95F20 MIN3 HR36 HR10 MIN10 HR73F35 MIN5 HR2 DAY15 MIN 5 HR50F50 MIN8 HR5 DAY25 MIN4 HRNote: At 7C/45F the pot life is 30 mins and the product is sandable after 24 hrs, immersion after 6 days.METAL: Above water: Pre-prime with Viny-Lux Primewash 353/354. Apply one coat of Epoxy Primekote. Sand surface with 80-120 grade (grit) paper, wipe clean. Apply Watertite*. Below water: Prime with Interprotect 2000E or Interprotect 3000. BARE FIBERGLASS: Clean with Fiberglass Surface Prep YMA601 or Fiberglass Solvent Wash 202. Sand with 80 grade (grit) paper. Remove sanding residue.APPLICATION INFORMATION: Mix in a 1:1 ratio by volume it is important to ensure the correct volume mix ratio is used. Mix the two components thoroughly to an even colour. Do not use below 7C. Do not apply more than " thickness at any one time. Product temperature should be minimum 10 C/50F and maximum 35C/95F. Ambient temperature should be minimum 7C/45F and maximum 35C/95F. Substrate temperature should be minimum 7C/45F and maximum 35C/95F. Apply using a trowel, spatula or putty knife. When the product has cured, wash with fresh water and sand with 80 grade (grit) paper. Apply to clean, dry, properly prepared surfaces only. Watertite* must be overcoated with VC Tar, VC Performance Epoxy, Interprotect 2000E/2001E or Interprotect 3000/3001. Do not apply topside finishes, polyester or vinylester materials over Watertite*. Click to Download Interlux Watertite Epoxy Filler Application Instructions